ZZ-EFEM/Jet/Jet_001_2P_Jet/EfemRT/Config/EventDefine.xml

<?xml version="1.0"?>
<EventDefine xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
  <EventDefinition>
    <Id>9</Id>
    <Description>Operator Access:{0}</Description>
    <Level>Information</Level>
    <EventEnum>OperationAuthorization</EventEnum>
    <DetailDesc>Only authorized account can execute operation and control command</DetailDesc>
    <Solution />
  </EventDefinition>
  <EventDefinition>
    <Id>10</Id>
    <Description>'{0}' Quit System.</Description>
    <Level>Information</Level>
    <EventEnum>UserLoggedOff</EventEnum>
    <DetailDesc>User Logged Off.</DetailDesc>
    <Solution />
  </EventDefinition>
  <EventDefinition>
    <Id>11</Id>
    <Description>User {0} login</Description>
    <Level>Information</Level>
    <EventEnum>UserLoggedIn</EventEnum>
    <DetailDesc>UserLogin</DetailDesc>
    <GlobalDescription_en>User {0} login</GlobalDescription_en>
    <GlobalDescription_zh>User {0} Login</GlobalDescription_zh>
    <Solution />
  </EventDefinition>
  <EventDefinition>
    <Id>12</Id>
    <Description>UserAccount'{0}'was modified.</Description>
    <Level>Information</Level>
    <EventEnum>AccountChanged</EventEnum>
    <DetailDesc>AccountChanged</DetailDesc>
    <Solution />
  </EventDefinition>
  <EventDefinition>
    <Id>13</Id>
    <Description>Account '{0}' password was changed.</Description>
    <Level>Information</Level>
    <EventEnum>PasswordChanged</EventEnum>
    <DetailDesc>PasswordChanged</DetailDesc>
    <Solution />
  </EventDefinition>
  <EventDefinition>
    <Id>14</Id>
    <Description>Account '{0}' was deleted.</Description>
    <Level>Information</Level>
    <EventEnum>AccountDeleted</EventEnum>
    <DetailDesc>AccountDeleted</DetailDesc>
    <Solution />
  </EventDefinition>
  <EventDefinition>
    <Id>15</Id>
    <Description>Account '{0}' was created.</Description>
    <Level>Information</Level>
    <EventEnum>AccountCreated</EventEnum>
    <DetailDesc>UserAccountCreated</DetailDesc>
    <Solution />
  </EventDefinition>
  <EventDefinition>
    <Id>19</Id>
    <Description>Wafer placed to {0}</Description>
    <Level>Information</Level>
    <EventEnum>PuttingWaferToChamberEnds</EventEnum>
    <DetailDesc>This event is posted right after put a wafer</DetailDesc>
    <Solution />
  </EventDefinition>
  <EventDefinition>
    <Id>20</Id>
    <Description>Placing wafer to {0}</Description>
    <Level>Information</Level>
    <EventEnum>PuttingWaferToChamberBegins</EventEnum>
    <DetailDesc>This event is posted right before placing</DetailDesc>
    <Solution />
  </EventDefinition>
  <EventDefinition>
    <Id>21</Id>
    <Description>Wafer picked from {0}</Description>
    <Level>Information</Level>
    <EventEnum>PickingWaferFromChamberEnds</EventEnum>
    <DetailDesc>This event is posted right after wafer picked</DetailDesc>
    <Solution />
  </EventDefinition>
  <EventDefinition>
    <Id>22</Id>
    <Description>Picking wafer from {0}</Description>
    <Level>Information</Level>
    <EventEnum>PickingWaferFromChamberBegins</EventEnum>
    <DetailDesc>This event is posted right before  picking  </DetailDesc>
    <Solution />
  </EventDefinition>
  <EventDefinition>
    <Id>25</Id>
    <Description>Align start：notch is {0}.</Description>
    <Level>Information</Level>
    <EventEnum>AlignBegins</EventEnum>
    <DetailDesc>When aligners start aligning.</DetailDesc>
    <Solution />
  </EventDefinition>
  <EventDefinition>
    <Id>26</Id>
    <Description>Align end.</Description>
    <Level>Information</Level>
    <EventEnum>AlignEnds</EventEnum>
    <DetailDesc>When aligners aligning completed.</DetailDesc>
    <Solution />
  </EventDefinition>
  <EventDefinition>
    <Id>27</Id>
    <Description>Align failed.{0}</Description>
    <Level>Warning</Level>
    <EventEnum>AlignFailed</EventEnum>
    <DetailDesc>When aligners aligning failed.</DetailDesc>
    <Solution />
  </EventDefinition>
  <EventDefinition>
    <Id>28</Id>
    <Description>Wafer {0} moved from {1} {2} to {3} {4}</Description>
    <Level>Information</Level>
    <EventEnum>WaferMoved</EventEnum>
    <DetailDesc>Wafer Move information.</DetailDesc>
    <Solution />
  </EventDefinition>
  <EventDefinition>
    <Id>36</Id>
    <Description>Wafer created at {0} slot {1}, status is {2}.</Description>
    <Level>Information</Level>
    <EventEnum>WaferCreate</EventEnum>
    <DetailDesc>Wafer Create Information </DetailDesc>
    <Solution />
  </EventDefinition>
  <EventDefinition>
    <Id>37</Id>
    <Description>Wafer deleted from {0} slot {1}.</Description>
    <Level>Information</Level>
    <EventEnum>WaferDelete</EventEnum>
    <DetailDesc>Wafer Delete Information</DetailDesc>
    <Solution />
  </EventDefinition>
  <EventDefinition>
    <Id>41</Id>
    <Description>{0} load FOUP start.</Description>
    <Level>Information</Level>
    <EventEnum>LoadFOUPStart</EventEnum>
    <DetailDesc>
    </DetailDesc>
    <Solution />
  </EventDefinition>
  <EventDefinition>
    <Id>42</Id>
    <Description>{0} load FOUP end.</Description>
    <Level>Information</Level>
    <EventEnum>LoadFOUPEnd</EventEnum>
    <DetailDesc>
    </DetailDesc>
    <Solution />
  </EventDefinition>
  <EventDefinition>
    <Id>43</Id>
    <Description>{0} load FOUP Failed.</Description>
    <Level>Alarm</Level>
    <EventEnum>LoadFOUPFailed</EventEnum>
    <DetailDesc>
    </DetailDesc>
    <Solution />
  </EventDefinition>
  <EventDefinition>
    <Id>44</Id>
    <Description>{0} unload FOUP start.</Description>
    <Level>Information</Level>
    <EventEnum>UnloadFOUPStart</EventEnum>
    <DetailDesc>
    </DetailDesc>
    <Solution />
  </EventDefinition>
  <EventDefinition>
    <Id>45</Id>
    <Description>{0} unload Foup end.</Description>
    <Level>Information</Level>
    <EventEnum>UnloadFOUPEnd</EventEnum>
    <DetailDesc>
    </DetailDesc>
    <Solution />
  </EventDefinition>
  <EventDefinition>
    <Id>46</Id>
    <Description>{0} unload Foup failed.</Description>
    <Level>Alarm</Level>
    <EventEnum>UnloadFOUPFailed</EventEnum>
    <DetailDesc>
    </DetailDesc>
    <Solution />
  </EventDefinition>
  <!-- PM Information -->
  <EventDefinition>
    <Id>1000</Id>
    <Description>{0}</Description>
    <Level>Information</Level>
    <EventEnum>GeneralInfo</EventEnum>
    <DetailDesc>默认事件类型(通用)</DetailDesc>
    <Solution>1222</Solution>
  </EventDefinition>
  <EventDefinition>
    <Id>1023</Id>
    <Description>{0} '{1}' stopped，reason: {2}.</Description>
    <Level>Information</Level>
    <EventEnum>ServiceRoutineAborted</EventEnum>
    <DetailDesc>where {0} is the chamber name, while {1} is the service name. When service routine is aborted, this event will be posted.</DetailDesc>
    <Solution />
  </EventDefinition>
  <EventDefinition>
    <Id>1033</Id>
    <Description>{0} {1}：{2}.</Description>
    <Level>Information</Level>
    <EventEnum>ServiceRoutineInfo</EventEnum>
    <DetailDesc>Indicate the information，{0}PM，{1}servicename，{2}actionname.</DetailDesc>
    <Solution />
  </EventDefinition>
  <EventDefinition>
    <Id>1040</Id>
    <Description>{0} {1}.</Description>
    <Level>Information</Level>
    <EventEnum>GuiCmdExecSucc</EventEnum>
    <DetailDesc>GUI command execution succesfully.{0}PM，{1}Command explaination.</DetailDesc>
    <Solution />
  </EventDefinition>
  <EventDefinition>
    <Id>1052</Id>
    <Description>{0} {1}.</Description>
    <Level>Information</Level>
    <EventEnum>SwInterlock</EventEnum>
    <DetailDesc>Software interlock.{0}PM，{1}Detailed Reason.</DetailDesc>
    <Solution />
  </EventDefinition>
  <!-- TM Warning -->
  <EventDefinition>
    <Id>2052</Id>
    <Description>用户 {0} 无操控权，请先获取操控权</Description>
    <Level>Warning</Level>
    <EventEnum>AccountWithoutAuthorization</EventEnum>
    <DetailDesc>Only authorized account can operate.</DetailDesc>
    <Solution>Apply Authorization</Solution>
  </EventDefinition>
  <EventDefinition>
    <Id>2053</Id>
    <Description>{0}.</Description>
    <Level>Warning</Level>
    <EventEnum>DefaultWarning</EventEnum>
    <DetailDesc>AlarmRange2000~3999，DefaultAlarmCode.</DetailDesc>
    <Solution>DefaultAlarmCode.</Solution>
  </EventDefinition>
  <!-- PM Warning -->
  <EventDefinition>
    <Id>3027</Id>
    <Description>{0} {1}.</Description>
    <Level>Warning</Level>
    <EventEnum>GuiCmdExecFailed</EventEnum>
    <DetailDesc>GUICommandFailed.</DetailDesc>
    <Solution>
      1.Check software interlock.
    </Solution>
  </EventDefinition>
  <EventDefinition>
    <Id>3034</Id>
    <Description>{0} DBConnectionError.</Description>
    <Level>Warning</Level>
    <EventEnum>DbConnFailed</EventEnum>
    <DetailDesc>The DB connection broken.</DetailDesc>
    <Solution>
      1.Check DB connection.
    </Solution>
  </EventDefinition>
  <EventDefinition>
    <Id>3038</Id>
    <Description>{0} {1}.</Description>
    <Level>Warning</Level>
    <EventEnum>SafePlcInterlock</EventEnum>
    <DetailDesc>SafePlcInterlock.</DetailDesc>
    <Solution>
      1.Check interlock
    </Solution>
  </EventDefinition>
  <EventDefinition>
    <Id>3039</Id>
    <Description>{0} Value{1}{2}failed，reason{3}.</Description>
    <Level>Warning</Level>
    <EventEnum>ValveOperationFail</EventEnum>
    <DetailDesc>ValveOperationTimeout.</DetailDesc>
    <Solution>
      1.Check if the value action satisfy the interlock.

    </Solution>
  </EventDefinition>
  <!-- TM Alarm -->
  <EventDefinition>
    <Id>4050</Id>
    <Description>Prepare transfer failed, {0}</Description>
    <Level>Alarm</Level>
    <EventEnum>TransferPrepareFailed</EventEnum>
    <DetailDesc></DetailDesc>
    <Solution>See detail description</Solution>
  </EventDefinition>
  <EventDefinition>
    <Id>4051</Id>
    <Description>{0}didn't detect wafer or wafer record</Description>
    <Level>Alarm</Level>
    <EventEnum>WaferAbsentWithoutRecord</EventEnum>
    <DetailDesc>Didn't detect wafer or record on destination</DetailDesc>
    <Solution>
      1.Check if there's wafer on destination.
    </Solution>
  </EventDefinition>
  <EventDefinition>
    <Id>4052</Id>
    <Description>{0}detect wafer,can't place.</Description>
    <Level>Alarm</Level>
    <EventEnum>WaferPresentWithRecord</EventEnum>
    <DetailDesc>There's wafer record on destination</DetailDesc>
    <Solution>
      1.There must be no wafer record on destination.

    </Solution>
  </EventDefinition>
  <EventDefinition>
    <Id>4054</Id>
    <Description>Place wafer to {0} {1} by {2} failed,{3}</Description>
    <Level>Alarm</Level>
    <EventEnum>PlaceWaferFailed</EventEnum>
    <DetailDesc>PlaceWaferFailed</DetailDesc>
    <Solution>
      Check detail reason
    </Solution>
  </EventDefinition>
  <EventDefinition>
    <Id>4055</Id>
    <Description>Failed pick wafer from {0}</Description>
    <Level>Alarm</Level>
    <EventEnum>PickingWaferFromChamberFails</EventEnum>
    <DetailDesc>failed pick wafer</DetailDesc>
    <Solution>
      1.check log to get the reason.

    </Solution>
  </EventDefinition>
  <EventDefinition>
    <Id>4061</Id>
    <Description>System detect wafer on arm after place.</Description>
    <Level>Alarm</Level>
    <EventEnum>WaferDetectedAfterSend</EventEnum>
    <DetailDesc>System detect wafer on arm after place.</DetailDesc>
    <Solution>
      1.Check Wafer sensor on arm.
      2.Check if Wafer drop.
    </Solution>
  </EventDefinition>
  <EventDefinition>
    <Id>4062</Id>
    <Description>System didn't detect wafer on arm before place.</Description>
    <Level>Alarm</Level>
    <EventEnum>WaferNotDetectedBeforeSend</EventEnum>
    <DetailDesc>System didn't detect wafer on arm before place</DetailDesc>
    <Solution>
      1.Check Wafer sensor on arm.
      2.Check if Wafer drop.
    </Solution>
  </EventDefinition>
  <EventDefinition>
    <Id>4063</Id>
    <Description>System didn't detect wafer on arm after pick</Description>
    <Level>Alarm</Level>
    <EventEnum>WaferNotDetectedAfterPick</EventEnum>
    <DetailDesc>System didn't detect wafer on arm after pick</DetailDesc>
    <Solution>
      1.Check Wafer sensor on arm.
      2.Check if Wafer drop.
    </Solution>
  </EventDefinition>
  <EventDefinition>
    <Id>4064</Id>
    <Description>System detect wafer on arm before pick</Description>
    <Level>Alarm</Level>
    <EventEnum>WaferDetectedBeforePick</EventEnum>
    <DetailDesc>System detect wafer on arm before pick</DetailDesc>
    <Solution>
      1.There must be no wafer or information on arm.
    </Solution>
  </EventDefinition>
  <EventDefinition>
    <Id>4093</Id>
    <Description>Alarm event:{0}.</Description>
    <GlobalDescription_en>Alarm event:{0}.</GlobalDescription_en>
    <GlobalDescription_zh>AlamrEvent:{0}.</GlobalDescription_zh>
    <Level>Alarm</Level>
    <EventEnum>DefaultAlarm</EventEnum>
    <DetailDesc>Alarm range4000~4000+，Default alarm code.</DetailDesc>
    <Solution>Default alarm event</Solution>
  </EventDefinition>
  <!-- PM Alarm -->
  <EventDefinition>
    <Id>5020</Id>
    <Description>{0} TV abnormal.</Description>
    <Level>Alarm</Level>
    <EventEnum>ThrottleValveAbnormal</EventEnum>
    <DetailDesc>Alarm was set when the TV abnormal.</DetailDesc>
    <Solution>
      1. Check TV working status.
    </Solution>
  </EventDefinition>
  <EventDefinition>
    <Id>5027</Id>
    <Description>{0} PLC running error.</Description>
    <Level>Alarm</Level>
    <EventEnum>PlcHeartBeatFail</EventEnum>
    <DetailDesc>PLC send heart beat fail.</DetailDesc>
    <Solution>
      1.Check if the PLC on PM is active.
    </Solution>
  </EventDefinition>
  <EventDefinition>
    <Id>5120</Id>
    <EventEnum>TCPConnSucess</EventEnum>
    <Description>TCP connect success,IP:{0} Port:{1}</Description>
    <DetailDesc>TCP connect success</DetailDesc>
    <Solution />
    <Level>Information</Level>
  </EventDefinition>
  <EventDefinition>
    <Id>5125</Id>
    <Description>{0} Communication error, {1}</Description>
    <Level>Alarm</Level>
    <EventEnum>CommunicationError</EventEnum>
    <DetailDesc>Error occur during communication with hardware</DetailDesc>
    <Solution>
      1.Check network
      2.Check hardware working status
    </Solution>
  </EventDefinition>
  <EventDefinition>
    <Id>5126</Id>
    <Description>{0} {1}Tolerance alarm：{2}.</Description>
    <GlobalDescription_en>{0} {1} Tolerance alarm：{2}.</GlobalDescription_en>
    <GlobalDescription_zh>{0} {1} Tolerance alarm：{2}.</GlobalDescription_zh>
    <Level>Alarm</Level>
    <EventEnum>ToleranceAlarm</EventEnum>
    <DetailDesc>Alarm was set when the tolerance out of spec.</DetailDesc>
    <Solution>
      1.Check if the device is working normal.
      2.Check if the setpoint or rate is out of spec.
    </Solution>
  </EventDefinition>
  <EventDefinition>
    <Id>5128</Id>
    <Description>TC {0} broken.</Description>
    <GlobalDescription_en>TC {0} broken.</GlobalDescription_en>
    <GlobalDescription_zh>TC {0} error.</GlobalDescription_zh>
    <Level>Alarm</Level>
    <EventEnum>TCBroken</EventEnum>
    <DetailDesc>display if TC is broken</DetailDesc>
    <Solution>
      change the broken TC.
    </Solution>
  </EventDefinition>
  <EventDefinition>
    <Id>5130</Id>
    <Description>System running mode changed to {0}</Description>
    <Level>Information</Level>
    <EventEnum>RunningModeChanged</EventEnum>
    <DetailDesc>system changed running mode</DetailDesc>
    <Solution />
    <GlobalDescription_en>System running mode changed to {0}</GlobalDescription_en>
    <GlobalDescription_zh>System running mode change to {0}</GlobalDescription_zh>
  </EventDefinition>
  <EventDefinition>
    <Id>5200</Id>
    <Description>Initialize start.</Description>
    <Level>Information</Level>
    <EventEnum>HomeBegins</EventEnum>
    <DetailDesc></DetailDesc>
    <Solution />
  </EventDefinition>
  <EventDefinition>
    <Id>5201</Id>
    <Description>Initialize end.</Description>
    <Level>Information</Level>
    <EventEnum>HomeEnds</EventEnum>
    <DetailDesc></DetailDesc>
    <Solution />
  </EventDefinition>
  <EventDefinition>
    <Id>5202</Id>
    <Description>Initialize failed，{0} .</Description>
    <Level>Alarm</Level>
    <EventEnum>HomeFailed</EventEnum>
    <DetailDesc></DetailDesc>
    <Solution>
      check subsystem.
    </Solution>
  </EventDefinition>
  <EventDefinition>
    <Id>5203</Id>
    <Description>Foup Arrived at {0}</Description>
    <Level>Information</Level>
    <EventEnum>CarrierArrived</EventEnum>
    <DetailDesc></DetailDesc>
    <Solution>
      Notify the Foup placed at the position.
    </Solution>
  </EventDefinition>
  <EventDefinition>
    <Id>5204</Id>
    <Description>Foup removed from {0}</Description>
    <Level>Information</Level>
    <EventEnum>CarrierRemoved</EventEnum>
    <DetailDesc></DetailDesc>
    <Solution>
      Notify the Foup is removed from the position.
    </Solution>
  </EventDefinition>
  <EventDefinition>
    <Id>5205</Id>
    <Description>Manually Push the OP button at {0}</Description>
    <Level>Information</Level>
    <EventEnum>ManualOpAccess</EventEnum>
    <DetailDesc></DetailDesc>
    <Solution>
      Notify the Foup will be load.
    </Solution>
  </EventDefinition>

  <EventDefinition>
    <Id>5206</Id>
    <Description>Read {0} Carrier ID, {1}</Description>
    <Level>Information</Level>
    <EventEnum>CarrierIdRead</EventEnum>
    <DetailDesc></DetailDesc>
    <Solution>
      Notify the carrier id was read.
    </Solution>
  </EventDefinition>

  <EventDefinition>
    <Id>5207</Id>
    <Description>Failed read {0} carrier ID</Description>
    <Level>Alarm</Level>
    <EventEnum>CarrierIdReadFailed</EventEnum>
    <DetailDesc></DetailDesc>
    <Solution>
      Notify failed while reading the carrier id.
    </Solution>
  </EventDefinition>

  <EventDefinition>
    <Id>5208</Id>
    <Description>{0} wafer mapped, {1}</Description>
    <Level>Information</Level>
    <EventEnum>SlotMapAvailable</EventEnum>
    <DetailDesc></DetailDesc>
    <Solution>
      Notify after mapped wafer.
    </Solution>
  </EventDefinition>

</EventDefine>