删除DI信号

VirgoRT/Config/_ioDefineVirgo.xml

@@ -18,8 +18,8 @@
 		<DI_ITEM Index="14" Name="DI_ARM_Not_Extend_to_PM" Device="" Addr="w20.14" Note="Interlock-PLC" />
 		<DI_ITEM Index="15" Name="DI_Generator_Hardware_Interlock" Device="" Addr="w20.15" Note="1=rf interlock ok,0=rf interlock off" />
 		<DI_ITEM Index="16" Name="" />
-		<DI_ITEM Index="17" Name="DI_Coolant_Inlet_TC_Broken_Alarm" Device="" Addr="w21.01" />
-		<DI_ITEM Index="18" Name="DI_Coolant_Outlet_TC_Broken_Alarm" Device="" Addr="w21.02" />
+		<!--<DI_ITEM Index="17" Name="DI_Coolant_Inlet_TC_Broken_Alarm" Device="" Addr="w21.01" />-->
+		<!--<DI_ITEM Index="18" Name="DI_Coolant_Outlet_TC_Broken_Alarm" Device="" Addr="w21.02" />-->
 		<DI_ITEM Index="19" Name="DI_Substrate_Control_TC_Broken_Alarm" Device="" Addr="w21.03" Note="0=OK,1=alarm" />
 		<DI_ITEM Index="20" Name="DI_Substrate_Monitor_TC_Broken_Alarm" Device="" Addr="w21.04" Note="0=OK,1=alarm" />
 		<DI_ITEM Index="21" Name="DI_Substrate_Heater_On_FB" Device="" Addr="w21.05" Note="0=OFF,1=ON" />
@@ -34,7 +34,7 @@
 		<DI_ITEM Index="30" Name="DI_GB_Pressure_Interlock" Device="" Addr="W21.14" />
 		<!--<DI_ITEM Index="31" Name="DI_CHB_Wall_OT_Switch_Alarm" Device="" Addr="W21.15"/>-->
 		<DI_ITEM Index="32" Name="DI_SRF_Water_Flow_Switch" Device="" Addr="W22.00" />
-		<DI_ITEM Index="33" Name="DI_Factory_Scrubber_SYS_Normal" Device="" Addr="W22.01" />
+		<!--<DI_ITEM Index="33" Name="DI_Factory_Scrubber_SYS_Normal" Device="" Addr="W22.01" />-->
 		<DI_ITEM Index="34" Name="" />
 		<DI_ITEM Index="35" Name="" />
 		<DI_ITEM Index="36" Name="DI_Substrate_TC_Deviation_out_of_range" Device="" Addr="w22.04" Note="0=OK，1=alarm" />

VirgoSimulator/Config/_ioDefineVirgo.xml

@@ -18,8 +18,8 @@
     <DI_ITEM Index="14" Name="DI_ARM_Not_Extend_to_PM" Device="" Addr="w20.14" Note="Interlock-PLC" />
     <DI_ITEM Index="15" Name="DI_Generator_Hardware_Interlock" Device="" Addr="w20.15" Note="1=rf interlock ok,0=rf interlock off" />
     <DI_ITEM Index="16" Name="" />
-    <DI_ITEM Index="17" Name="DI_Coolant_Inlet_TC_Broken_Alarm" Device="" Addr="w21.01" />
-    <DI_ITEM Index="18" Name="DI_Coolant_Outlet_TC_Broken_Alarm" Device="" Addr="w21.02" />
+    <!--<DI_ITEM Index="17" Name="DI_Coolant_Inlet_TC_Broken_Alarm" Device="" Addr="w21.01" />-->
+    <!--<DI_ITEM Index="18" Name="DI_Coolant_Outlet_TC_Broken_Alarm" Device="" Addr="w21.02" />-->
     <DI_ITEM Index="19" Name="DI_Substrate_Control_TC_Broken_Alarm" Device="" Addr="w21.03" Note="0=OK,1=alarm" />
     <DI_ITEM Index="20" Name="DI_Substrate_Monitor_TC_Broken_Alarm" Device="" Addr="w21.04" Note="0=OK,1=alarm" />
     <DI_ITEM Index="21" Name="DI_Substrate_Heater_On_FB" Device="" Addr="w21.05" Note="0=OFF,1=ON" />
@@ -34,7 +34,7 @@
     <DI_ITEM Index="30" Name="DI_GB_Pressure_Interlock" Device="" Addr="W21.14" />
     <!--<DI_ITEM Index="31" Name="DI_CHB_Wall_OT_Switch_Alarm" Device="" Addr="W21.15"/>-->
     <DI_ITEM Index="32" Name="DI_SRF_Water_Flow_Switch" Device="" Addr="W22.00" />
-    <DI_ITEM Index="33" Name="DI_Factory_Scrubber_SYS_Normal" Device="" Addr="W22.01" />
+    <!--<DI_ITEM Index="33" Name="DI_Factory_Scrubber_SYS_Normal" Device="" Addr="W22.01" />-->
     <DI_ITEM Index="34" Name="" />
     <DI_ITEM Index="35" Name="" />
     <DI_ITEM Index="36" Name="DI_Substrate_TC_Deviation_out_of_range" Device="" Addr="w22.04" Note="0=OK，1=alarm" />

VirgoSimulator/Instances/SimulatorSystem.cs

@@ -62,8 +62,8 @@ namespace VirgoSimulator.Instances
             IO.DI[$"{mod}.DI_CTRL_Box_Fans_Running"].Value = true;
 
             IO.DI[$"{mod}.DI_Cooling_Water_Flow_Switch"].Value = true;
-            IO.DI[$"{mod}.DI_Coolant_Inlet_TC_Broken_Alarm"].Value = false;
-            IO.DI[$"{mod}.DI_Coolant_Outlet_TC_Broken_Alarm"].Value = false;
+            //IO.DI[$"{mod}.DI_Coolant_Inlet_TC_Broken_Alarm"].Value = false;
+            //IO.DI[$"{mod}.DI_Coolant_Outlet_TC_Broken_Alarm"].Value = false;
             IO.DI[$"{mod}.DI_Water_Leak_Sensor"].Value = true;
             IO.DI[$"{mod}.DI_ARM_Not_Extend_to_PM"].Value = true;
             IO.DI[$"{mod}.DI_MFC1_Pressure_Switch"].Value = true;