Helios/PHT/_Boot/TwinCAT RT (x64)/CurrentEventMessages.xml

<?xml version="1.0"?>
<TcEventSources Version="2">
	<Source>
		<GUID>{28111931-0002-0000-5230-7E0700001100}</GUID>
		<Name LcId="1031">EL1918, 8K. Safety Eingang 24V, TwinSAFE</Name>
		<Name LcId="1033">EL1918, 8Ch. Safety Input 24V, TwinSAFE</Name>
		<Event>
			<Id>1</Id>
			<Message LcId="1033">Primary MC: GLOBAL_Fault with Code 0x{0,x} and Additional Code 0x{1,x}</Message>
		</Event>
		<Event>
			<Id>2</Id>
			<Message LcId="1033">Primary MC: GLOBAL_Shutdown with Code 0x{0,x} and Additional Code 0x{1,x}</Message>
		</Event>
		<Event>
			<Id>3</Id>
			<Message LcId="1033">Secondary MC: GLOBAL_Fault with Code 0x{0,x} and Additional Code 0x{1,x}</Message>
		</Event>
		<Event>
			<Id>4</Id>
			<Message LcId="1033">Secondary MC: GLOBAL_Shutdown with Code 0x{0,x} and Additional Code 0x{1,x}</Message>
		</Event>
		<Event>
			<Id>5</Id>
			<Message LcId="1033">Primary MC: Stored GLOBAL_Fault with Code 0x{0,x} and Additional Code 0x{1,x}</Message>
		</Event>
		<Event>
			<Id>6</Id>
			<Message LcId="1033">Secondary MC: Stored GLOBAL_Fault with Code 0x{0,x} and Additional Code 0x{1,x}</Message>
		</Event>
		<Event>
			<Id>7</Id>
			<Message LcId="1033">Diag-Message-Overflow: {0} messages got lost</Message>
		</Event>
		<Event>
			<Id>8</Id>
			<Message LcId="1033">Primary MC: the CRC of the FRAM Data was wrong (Diag-Code={0})</Message>
		</Event>
		<Event>
			<Id>9</Id>
			<Message LcId="1033">Secondary MC: the CRC of the FRAM Data was wrong (Diag-Code={0})</Message>
		</Event>
		<Event>
			<Id>16</Id>
			<Message LcId="1033">Reserved CfgData has to be zero st offset {0}</Message>
		</Event>
		<Event>
			<Id>17</Id>
			<Message LcId="1033">The password is wrong</Message>
		</Event>
		<Event>
			<Id>18</Id>
			<Message LcId="1033">The user was not found</Message>
		</Event>
		<Event>
			<Id>19</Id>
			<Message LcId="1033">The CRC of the login data does not match</Message>
		</Event>
		<Event>
			<Id>20</Id>
			<Message LcId="1033">The serial number of the login data does not match</Message>
		</Event>
		<Event>
			<Id>21</Id>
			<Message LcId="1033">The login watchdog has been expired</Message>
		</Event>
		<Event>
			<Id>22</Id>
			<Message LcId="1033">The user was logged out before</Message>
		</Event>
		<Event>
			<Id>23</Id>
			<Message LcId="1033">The user has not sufficient access rights</Message>
		</Event>
		<Event>
			<Id>24</Id>
			<Message LcId="1033">The reserved area of the CfgData was not 0</Message>
		</Event>
		<Event>
			<Id>25</Id>
			<Message LcId="1033">The CRC of the CfgData was wrong</Message>
		</Event>
		<Event>
			<Id>26</Id>
			<Message LcId="1033">The user name is wrong at word offset 0x{0,x} when changing the password</Message>
		</Event>
		<Event>
			<Id>27</Id>
			<Message LcId="1033">The requested number of users is too big</Message>
		</Event>
		<Event>
			<Id>29</Id>
			<Message LcId="1033">The user update flags are wrong at word offset 0x{0,x} when changing the password</Message>
		</Event>
		<Event>
			<Id>30</Id>
			<Message LcId="1033">The wrong user (user {0}) is logged in when changing the password (user {1} found in the received data)</Message>
		</Event>
		<Event>
			<Id>33</Id>
			<Message LcId="1033">the maximum Global-Shutdown counter was exceeded in the Vendor Data (maximum value: {0}, actual value: {1})</Message>
		</Event>
		<Event>
			<Id>48</Id>
			<Message LcId="1033">Sync Manager 2 Address (0x{0,x}) is invalid, minimum value = 0x{1,x}, maximum value = 0x{2,x}</Message>
		</Event>
		<Event>
			<Id>49</Id>
			<Message LcId="1033">Sync Manager 3 Address (0x{0,x}) is invalid, minimum value = 0x{1,x}, maximum value = 0x{2,x}</Message>
		</Event>
		<Event>
			<Id>50</Id>
			<Message LcId="1033">Sync Manager 4 Address (0x{0,x}) is invalid, minimum value = 0x{1,x}, maximum value = 0x{2,x}</Message>
		</Event>
		<Event>
			<Id>51</Id>
			<Message LcId="1033">Sync Manager 5 Address (0x{0,x}) is invalid, minimum value = 0x{1,x}, maximum value = 0x{2,x}</Message>
		</Event>
		<Event>
			<Id>52</Id>
			<Message LcId="1033">Sync Manager 2 Size ({0}) is invalid, minimum value = {1}, maximum value = {2}</Message>
		</Event>
		<Event>
			<Id>53</Id>
			<Message LcId="1033">Sync Manager 3 Size ({0}) is invalid, minimum value = {1}, maximum value = {2}</Message>
		</Event>
		<Event>
			<Id>54</Id>
			<Message LcId="1033">Sync Manager 4 Size ({0}) is invalid, minimum value = {1}, maximum value = {2}</Message>
		</Event>
		<Event>
			<Id>55</Id>
			<Message LcId="1033">Sync Manager 5 Size ({0}) is invalid, minimum value = {1}, maximum value = {2}</Message>
		</Event>
		<Event>
			<Id>56</Id>
			<Message LcId="1033">Sync Manager {0} Settings (Offset 4-7) are invalid, expected values = 0x{1,x}, 0x{2,x}</Message>
		</Event>
		<Event>
			<Id>68</Id>
			<Message LcId="1033">Sync Manager 6 Address (0x{0,x}) is invalid, minimum value = 0x{1,x}, maximum value = 0x{2,x}</Message>
		</Event>
		<Event>
			<Id>69</Id>
			<Message LcId="1033">Sync Manager 7 Address (0x{0,x}) is invalid, minimum value = 0x{1,x}, maximum value = 0x{2,x}</Message>
		</Event>
		<Event>
			<Id>72</Id>
			<Message LcId="1033">Sync Manager 6 Size ({0}) is invalid, minimum value = {1}, maximum value = {2}</Message>
		</Event>
		<Event>
			<Id>73</Id>
			<Message LcId="1033">Sync Manager 7 Size ({0}) is invalid, minimum value = {1}, maximum value = {2}</Message>
		</Event>
		<Event>
			<Id>257</Id>
			<Message LcId="1033">Primary MC: Completed RAM TEST: Starttime: 0x{0,x} and Stoptime: 0x{1,x} . The calculated timediff is 0x{2,x}.</Message>
		</Event>
		<Event>
			<Id>258</Id>
			<Message LcId="1033">Secondary MC: Completed RAM TEST: Starttime: 0x{0,x} and Stoptime: 0x{1,x} . The calculated timediff is 0x{2,x}.</Message>
		</Event>
		<Event>
			<Id>259</Id>
			<Message LcId="1033">C1 MCTEST Info: Arg1: 0x{0,x}, Arg2: 0x{1,x}, Arg3: 0x{2,x}.</Message>
		</Event>
		<Event>
			<Id>260</Id>
			<Message LcId="1033">C2 MCTEST Info: Arg1: 0x{0,x}, Arg2: 0x{1,x}, Arg3: 0x{2,x}.</Message>
		</Event>
		<Event>
			<Id>277</Id>
			<Message LcId="1033"><![CDATA[Controller {0}: Maximum temperature exceeded. Temperature is 0x{1,x}, should be <= 0x{2,x}.]]></Message>
		</Event>
		<Event>
			<Id>278</Id>
			<Message LcId="1033"><![CDATA[Controller {0}: Minimum temperature alert. Temperature is 0x{1,x}, should be >= 0x{2,x}.]]></Message>
		</Event>
		<Event>
			<Id>279</Id>
			<Message LcId="1033"><![CDATA[Controller {0}: Temperature difference too high. Difference is {1}, should be <= {2}.]]></Message>
		</Event>
		<Event>
			<Id>280</Id>
			<Message LcId="1033"><![CDATA[Controller {0}: Maximum voltage alert (Partner_VCC). Voltage is 0x{1,x}, should be <= 0x{2,x}.]]></Message>
		</Event>
		<Event>
			<Id>281</Id>
			<Message LcId="1033"><![CDATA[Controller {0}: Minimum voltage alert (Partner_VCC). Voltage is 0x{1,x}, should be >= 0x{2,x}.]]></Message>
		</Event>
		<Event>
			<Id>282</Id>
			<Message LcId="1033"><![CDATA[Controller {0}: Maximum voltage alert (ECAT_VCC). Voltage is 0x{1,x}, should be <= 0x{2,x}.]]></Message>
		</Event>
		<Event>
			<Id>283</Id>
			<Message LcId="1033"><![CDATA[Controller {0}: Minimum voltage alert (ECAT_VCC). Voltage is 0x{1,x}, should be >= 0x{2,x}.]]></Message>
		</Event>
		<Event>
			<Id>286</Id>
			<Message LcId="1033"><![CDATA[Controller {0}: Timer Tick Difference is too high. Difference is 0x{1,x}, should be >= 0x{2,x}.]]></Message>
		</Event>
		<Event>
			<Id>287</Id>
			<Message LcId="1033">Controller {0}: Minimum value alert (Individual ADC Check). Channel parameter = {1}. Actual value is 0x{2,x}.</Message>
		</Event>
		<Event>
			<Id>288</Id>
			<Message LcId="1033">Controller {0}: Maximum value alert (Individual ADC Check). Channel parameter = {1}. Actual value is 0x{2,x}.</Message>
		</Event>
		<Event>
			<Id>289</Id>
			<Message LcId="1033">Module Shutdown due to minimum value alert (Individual ADC Check). Channel parameter = {0}.</Message>
		</Event>
		<Event>
			<Id>4096</Id>
			<Message LcId="1033">The size of the safe User Parameter is too small ({0}), the expected size is {1}</Message>
		</Event>
		<Event>
			<Id>4097</Id>
			<Message LcId="1033">The Vendor-ID ({0}) is unequal the expected value of {1}</Message>
		</Event>
		<Event>
			<Id>4098</Id>
			<Message LcId="1033">The Product-Code ({0}) is unequal the expected value of {1}</Message>
		</Event>
		<Event>
			<Id>4099</Id>
			<Message LcId="1033">The reserved data of the SafeOut User Parameter of module {0} at byte offset 0x{1,x} has to be 0</Message>
		</Event>
		<Event>
			<Id>4100</Id>
			<Message LcId="1033">The reserved data of the SafeIn User Parameter of module {0} at byte offset 0x{1,x} has to be 0</Message>
		</Event>
		<Event>
			<Id>4101</Id>
			<Message LcId="1033">The standard outputs of module {0} should be enabled but the Sync-Manager 6 is not configured or enabled correctly</Message>
		</Event>
		<Event>
			<Id>4102</Id>
			<Message LcId="1033">The FASTSTDOUT mode of the standard outputs of module {0} is not supported</Message>
		</Event>
		<Event>
			<Id>4103</Id>
			<Message LcId="1033">The SAFEOUT-Module-Number ({0}) for the ExternalPulseDetection of the SAFEIN-Module {1} is wrong, the allowed range is 1-{2}</Message>
		</Event>
		<Event>
			<Id>4104</Id>
			<Message LcId="1033">The SAFEOUT-Channel-Number ({0}) for the ExternalPulseDetection of the SAFEIN-Module {1} is wrong, the allowed range is 1-{2}</Message>
		</Event>
		<Event>
			<Id>4105</Id>
			<Message LcId="1033">The Bumper-Mode {0} is not supported for SAFEIN-Module {1}</Message>
		</Event>
		<Event>
			<Id>4106</Id>
			<Message LcId="1033">The version of the Product-Code (0x{0,x}) is unequal the expected value of 0x{1,x}</Message>
		</Event>
		<Event>
			<Id>4112</Id>
			<Message LcId="1033">The default Project CRC is wrong, the received value is 0x{0,x}</Message>
		</Event>
		<Event>
			<Id>4128</Id>
			<Message LcId="1033">The watchdog for the Standard Outputs was expired</Message>
		</Event>
		<Event>
			<Id>4144</Id>
			<Message LcId="1033">The size of the safe User Parameter is too big ({0}), the expected size is {1}</Message>
		</Event>
		<Event>
			<Id>5569</Id>
			<Message LcId="1033">SAFEIN-Module {0}: Module Fault due to Fault Link</Message>
		</Event>
		<Event>
			<Id>5601</Id>
			<Message LcId="1033">SAFEOUT-Module:{0}: Overcurrent detected; Counter:0x{1,x}</Message>
		</Event>
		<Event>
			<Id>8193</Id>
			<Message LcId="1033">The {0}. connection has received an invalid FSoE-Cmd in state CONNECTION</Message>
		</Event>
		<Event>
			<Id>8194</Id>
			<Message LcId="1033">The {0}. connection has received an unknown FSoE-Cmd in state CONNECTION</Message>
		</Event>
		<Event>
			<Id>8195</Id>
			<Message LcId="1033">The {0}. connection has received an invalid FSoE-ConnID in state CONNECTION</Message>
		</Event>
		<Event>
			<Id>8196</Id>
			<Message LcId="1033">The {0}. connection has received an invalid FSoE-CRC in state CONNECTION</Message>
		</Event>
		<Event>
			<Id>8197</Id>
			<Message LcId="1033">The FSoE-Watchdog of the {0}. connection has been expired in state CONNECTION</Message>
		</Event>
		<Event>
			<Id>8198</Id>
			<Message LcId="1033">On the {0}. connection the received FSoE-Address (0x{1,x}) does not match with the expected FSoE-Address (0x{2,x})</Message>
		</Event>
		<Event>
			<Id>8199</Id>
			<Message LcId="1033">On the {0}. connection the received connection data do not match with the sent values</Message>
		</Event>
		<Event>
			<Id>8204</Id>
			<Message LcId="1033">On the {0}. connection in state CONNECTION the Connection was restarted from the FSoE-Master</Message>
		</Event>
		<Event>
			<Id>8206</Id>
			<Message LcId="1033">A Module fault was detected on the {0}. connection in state CONNECTION</Message>
		</Event>
		<Event>
			<Id>8209</Id>
			<Message LcId="1033">On the {0}. connection in state CONNECTION a FSoE-Reset with Error-Code 1 was received which means that the communication partner has received an invalid FSoE-Cmd</Message>
		</Event>
		<Event>
			<Id>8210</Id>
			<Message LcId="1033">On the {0}. connection in state CONNECTION a FSoE-Reset with Error-Code 2 was received which means that the communication partner has received an unknown FSoE-Cmd</Message>
		</Event>
		<Event>
			<Id>8211</Id>
			<Message LcId="1033">On the {0}. connection in state CONNECTION a FSoE-Reset with Error-Code 3 was received which means that the communication partner has received an invalid FSoE-ConnID</Message>
		</Event>
		<Event>
			<Id>8212</Id>
			<Message LcId="1033">On the {0}. connection in state CONNECTION a FSoE-Reset with Error-Code 4 was received which means that the communication partner has received an invalid FSoE-CRC</Message>
		</Event>
		<Event>
			<Id>8213</Id>
			<Message LcId="1033">On the {0}. connection in state CONNECTION a FSoE-Reset with Error-Code 5 was received which means that the FSoE-Watchdog has been expired in the communication partner</Message>
		</Event>
		<Event>
			<Id>8214</Id>
			<Message LcId="1033">On the {0}. connection in state CONNECTION a FSoE-Reset with Error-Code 6 was received which means that the communication partner has received an invalid FSoE-Address</Message>
		</Event>
		<Event>
			<Id>8215</Id>
			<Message LcId="1033">On the {0}. connection in state CONNECTION a FSoE-Reset with Error-Code 7 was received which means that the communication partner has received connection data do not match with the sent values</Message>
		</Event>
		<Event>
			<Id>8216</Id>
			<Message LcId="1033">On the {0}. connection in state CONNECTION a FSoE-Reset with Error-Code 8 was received which means that the communication partner has received an invalid communication parameter length</Message>
		</Event>
		<Event>
			<Id>8217</Id>
			<Message LcId="1033">On the {0}. connection in state CONNECTION a FSoE-Reset with Error-Code 9 was received which means that the communication partner has received an invalid FSoE Watchdog</Message>
		</Event>
		<Event>
			<Id>8218</Id>
			<Message LcId="1033">On the {0}. connection in state CONNECTION a FSoE-Reset with Error-Code 10 was received which means that the communication partner has received an invalid application parameter length</Message>
		</Event>
		<Event>
			<Id>8219</Id>
			<Message LcId="1033">On the {0}. connection in state CONNECTION a FSoE-Reset with Error-Code 11 was received which means that the communication partner has received invalid application parameter data</Message>
		</Event>
		<Event>
			<Id>8220</Id>
			<Message LcId="1033">On the {0}. connection in state CONNECTION a FSoE-Reset with Error-Code 12 was received</Message>
		</Event>
		<Event>
			<Id>8221</Id>
			<Message LcId="1033">On the {0}. connection in state CONNECTION a FSoE-Reset with Error-Code 13 was received</Message>
		</Event>
		<Event>
			<Id>8222</Id>
			<Message LcId="1033">On the {0}. connection in state CONNECTION a FSoE-Reset with Error-Code 14 was received which means that the communication partner has detected a module fault</Message>
		</Event>
		<Event>
			<Id>8223</Id>
			<Message LcId="1033">On the {0}. connection in state CONNECTION a FSoE-Reset with Error-Code 0x{1,x} was received</Message>
		</Event>
		<Event>
			<Id>8257</Id>
			<Message LcId="1033">The {0}. connection has received an invalid FSoE-Cmd in state PARAMETER</Message>
		</Event>
		<Event>
			<Id>8258</Id>
			<Message LcId="1033">The {0}. connection has received an unknown FSoE-Cmd in state PARAMETER</Message>
		</Event>
		<Event>
			<Id>8259</Id>
			<Message LcId="1033">The {0}. connection has received an invalid FSoE-ConnID in state PARAMETER</Message>
		</Event>
		<Event>
			<Id>8260</Id>
			<Message LcId="1033">The {0}. connection has received an invalid FSoE-CRC in state PARAMETER</Message>
		</Event>
		<Event>
			<Id>8261</Id>
			<Message LcId="1033">The FSoE-Watchdog of the {0}. connection has been expired in state PARAMETER</Message>
		</Event>
		<Event>
			<Id>8263</Id>
			<Message LcId="1033">On the {0}. connection the received parameter data do not match with the sent values</Message>
		</Event>
		<Event>
			<Id>8264</Id>
			<Message LcId="1033">On the {0}. connection the received communication parameter length ({1}) does not match with the expected value of 2</Message>
		</Event>
		<Event>
			<Id>8265</Id>
			<Message LcId="1033">On the {0}. connection the received FSoE Watchdog ({1}) is outside the allowed area from 2 to 60000</Message>
		</Event>
		<Event>
			<Id>8266</Id>
			<Message LcId="1033">On the {0}. connection the received application parameter length ({1}) is unequal the expected length of {2}</Message>
		</Event>
		<Event>
			<Id>8267</Id>
			<Message LcId="1033">On the {0}. connection the received application parameter data are wrong</Message>
		</Event>
		<Event>
			<Id>8268</Id>
			<Message LcId="1033">On the {0}. connection in state PARAMETER the Connection was restarted from the FSoE-Master</Message>
		</Event>
		<Event>
			<Id>8270</Id>
			<Message LcId="1033">A Module fault was detected on the {0}. connection in state PARAMETER</Message>
		</Event>
		<Event>
			<Id>8273</Id>
			<Message LcId="1033">On the {0}. connection in state PARAMETER a FSoE-Reset with Error-Code 1 was received which means that the communication partner has received an invalid FSoE-Cmd</Message>
		</Event>
		<Event>
			<Id>8274</Id>
			<Message LcId="1033">On the {0}. connection in state PARAMETER a FSoE-Reset with Error-Code 2 was received which means that the communication partner has received an unknown FSoE-Cmd</Message>
		</Event>
		<Event>
			<Id>8275</Id>
			<Message LcId="1033">On the {0}. connection in state PARAMETER a FSoE-Reset with Error-Code 3 was received which means that the communication partner has received an invalid FSoE-ConnID</Message>
		</Event>
		<Event>
			<Id>8276</Id>
			<Message LcId="1033">On the {0}. connection in state PARAMETER a FSoE-Reset with Error-Code 4 was received which means that the communication partner has received an invalid FSoE-CRC</Message>
		</Event>
		<Event>
			<Id>8277</Id>
			<Message LcId="1033">On the {0}. connection in state PARAMETER a FSoE-Reset with Error-Code 5 was received which means that the FSoE-Watchdog has been expired in the communication partner</Message>
		</Event>
		<Event>
			<Id>8278</Id>
			<Message LcId="1033">On the {0}. connection in state PARAMETER a FSoE-Reset with Error-Code 6 was received which means that the communication partner has received an invalid FSoE-Address</Message>
		</Event>
		<Event>
			<Id>8279</Id>
			<Message LcId="1033">On the {0}. connection in state PARAMETER a FSoE-Reset with Error-Code 7 was received which means that the communication partner has received connection data do not match with the sent values</Message>
		</Event>
		<Event>
			<Id>8280</Id>
			<Message LcId="1033">On the {0}. connection in state PARAMETER a FSoE-Reset with Error-Code 8 was received which means that the communication partner has received an invalid communication parameter length</Message>
		</Event>
		<Event>
			<Id>8281</Id>
			<Message LcId="1033">On the {0}. connection in state PARAMETER a FSoE-Reset with Error-Code 9 was received which means that the communication partner has received an invalid FSoE Watchdog</Message>
		</Event>
		<Event>
			<Id>8282</Id>
			<Message LcId="1033">On the {0}. connection in state PARAMETER a FSoE-Reset with Error-Code 10 was received which means that the communication partner has received an invalid application parameter length</Message>
		</Event>
		<Event>
			<Id>8283</Id>
			<Message LcId="1033">On the {0}. connection in state PARAMETER a FSoE-Reset with Error-Code 11 was received which means that the communication partner has received invalid application parameter data</Message>
		</Event>
		<Event>
			<Id>8284</Id>
			<Message LcId="1033">On the {0}. connection in state PARAMETER a FSoE-Reset with Error-Code 12 was received</Message>
		</Event>
		<Event>
			<Id>8285</Id>
			<Message LcId="1033">On the {0}. connection in state PARAMETER a FSoE-Reset with Error-Code 13 was received</Message>
		</Event>
		<Event>
			<Id>8286</Id>
			<Message LcId="1033">On the {0}. connection in state PARAMETER a FSoE-Reset with Error-Code 14 was received which means that the communication partner has detected a module fault</Message>
		</Event>
		<Event>
			<Id>8287</Id>
			<Message LcId="1033">On the {0}. connection in state PARAMETER a FSoE-Reset with Error-Code 0x{1,x} was received</Message>
		</Event>
		<Event>
			<Id>8289</Id>
			<Message LcId="1033">On the {0}. connection in state PARAMETER a wrong Command was received, which means that the Safe-Parameter size is wrong (Expected size: {1}, Received size: {2})</Message>
		</Event>
		<Event>
			<Id>8321</Id>
			<Message LcId="1033">The {0}. connection has received an invalid FSoE-Cmd in state DATA</Message>
		</Event>
		<Event>
			<Id>8322</Id>
			<Message LcId="1033">The {0}. connection has received an unknown FSoE-Cmd in state DATA</Message>
		</Event>
		<Event>
			<Id>8323</Id>
			<Message LcId="1033">The {0}. connection has received an invalid FSoE-ConnID in state DATA</Message>
		</Event>
		<Event>
			<Id>8324</Id>
			<Message LcId="1033">The {0}. connection has received an invalid FSoE-CRC in state DATA</Message>
		</Event>
		<Event>
			<Id>8325</Id>
			<Message LcId="1033">The FSoE-Watchdog of the {0}. connection has been expired in state DATA</Message>
		</Event>
		<Event>
			<Id>8332</Id>
			<Message LcId="1033">On the {0}. connection in state DATA the Connection was restarted from the FSoE-Master</Message>
		</Event>
		<Event>
			<Id>8333</Id>
			<Message LcId="1033">The FailSafeData command was received on the {0}. connection in state DATA</Message>
		</Event>
		<Event>
			<Id>8334</Id>
			<Message LcId="1033">A Module fault was detected on the {0}. connection in state DATA</Message>
		</Event>
		<Event>
			<Id>8337</Id>
			<Message LcId="1033">On the {0}. connection in state DATA a FSoE-Reset with Error-Code 1 was received which means that the communication partner has received an invalid FSoE-Cmd</Message>
		</Event>
		<Event>
			<Id>8338</Id>
			<Message LcId="1033">On the {0}. connection in state DATA a FSoE-Reset with Error-Code 2 was received which means that the communication partner has received an unknown FSoE-Cmd</Message>
		</Event>
		<Event>
			<Id>8339</Id>
			<Message LcId="1033">On the {0}. connection in state DATA a FSoE-Reset with Error-Code 3 was received which means that the communication partner has received an invalid FSoE-ConnID</Message>
		</Event>
		<Event>
			<Id>8340</Id>
			<Message LcId="1033">On the {0}. connection in state DATA a FSoE-Reset with Error-Code 4 was received which means that the communication partner has received an invalid FSoE-CRC</Message>
		</Event>
		<Event>
			<Id>8341</Id>
			<Message LcId="1033">On the {0}. connection in state DATA a FSoE-Reset with Error-Code 5 was received which means that the FSoE-Watchdog has been expired in the communication partner</Message>
		</Event>
		<Event>
			<Id>8342</Id>
			<Message LcId="1033">On the {0}. connection in state DATA a FSoE-Reset with Error-Code 6 was received which means that the communication partner has received an invalid FSoE-Address</Message>
		</Event>
		<Event>
			<Id>8343</Id>
			<Message LcId="1033">On the {0}. connection in state DATA a FSoE-Reset with Error-Code 7 was received which means that the communication partner has received connection data do not match with the sent values</Message>
		</Event>
		<Event>
			<Id>8344</Id>
			<Message LcId="1033">On the {0}. connection in state DATA a FSoE-Reset with Error-Code 8 was received which means that the communication partner has received an invalid communication parameter length</Message>
		</Event>
		<Event>
			<Id>8345</Id>
			<Message LcId="1033">On the {0}. connection in state DATA a FSoE-Reset with Error-Code 9 was received which means that the communication partner has received an invalid FSoE Watchdog</Message>
		</Event>
		<Event>
			<Id>8346</Id>
			<Message LcId="1033">On the {0}. connection in state DATA a FSoE-Reset with Error-Code 10 was received which means that the communication partner has received an invalid application parameter length</Message>
		</Event>
		<Event>
			<Id>8347</Id>
			<Message LcId="1033">On the {0}. connection in state DATA a FSoE-Reset with Error-Code 11 was received which means that the communication partner has received invalid application parameter data</Message>
		</Event>
		<Event>
			<Id>8348</Id>
			<Message LcId="1033">On the {0}. connection in state DATA a FSoE-Reset with Error-Code 12 was received</Message>
		</Event>
		<Event>
			<Id>8349</Id>
			<Message LcId="1033">On the {0}. connection in state DATA a FSoE-Reset with Error-Code 13 was received</Message>
		</Event>
		<Event>
			<Id>8350</Id>
			<Message LcId="1033">On the {0}. connection in state DATA a FSoE-Reset with Error-Code 14 was received which means that the communication partner has detected a module fault</Message>
		</Event>
		<Event>
			<Id>8351</Id>
			<Message LcId="1033">On the {0}. connection in state DATA a FSoE-Reset with Error-Code 0x{1,x} was received</Message>
		</Event>
		<Event>
			<Id>8385</Id>
			<Message LcId="1033">The {0}. connection has received an invalid FSoE-Cmd in state SHUTDOWN</Message>
		</Event>
		<Event>
			<Id>8386</Id>
			<Message LcId="1033">The {0}. connection has received an unknown FSoE-Cmd in state SHUTDOWN</Message>
		</Event>
		<Event>
			<Id>8388</Id>
			<Message LcId="1033">The {0}. connection has received an invalid FSoE-CRC in state SHUTDOWN</Message>
		</Event>
		<Event>
			<Id>8419</Id>
			<Message LcId="1033">The {0}. connection has received the invalid FSoE-ConnID 0 in state SESSION</Message>
		</Event>
		<Event>
			<Id>8449</Id>
			<Message LcId="1033">On the {0}. connection the PROFIsafe-Slave reports a communication error</Message>
		</Event>
		<Event>
			<Id>8450</Id>
			<Message LcId="1033">On the {0}. connection the PROFIsafe-Slave reports a watchdog error</Message>
		</Event>
		<Event>
			<Id>8451</Id>
			<Message LcId="1033">On the {0}. connection the PROFIsafe-Slave reports a device fault</Message>
		</Event>
		<Event>
			<Id>8452</Id>
			<Message LcId="1033">On the {0}. connection a CRC2-Error was detected locally on the PROFIsafe Host</Message>
		</Event>
		<Event>
			<Id>8453</Id>
			<Message LcId="1033">On the {0}. connection the Watchdog has been expired locally on the PROFIsafe Host</Message>
		</Event>
		<Event>
			<Id>8468</Id>
			<Message LcId="1033">On the {0}. connection a CRC2-Error was detected locally on the PROFIsafe Slave</Message>
		</Event>
		<Event>
			<Id>8469</Id>
			<Message LcId="1033">On the {0}. connection the Watchdog has been expired locally on the PROFIsafe Slave</Message>
		</Event>
		<Event>
			<Id>8471</Id>
			<Message LcId="1033">On the {0}. connection the Bit 7 of the F_Control is reset, which is not allowed on a PROFIsafe Slave connection with the same message size for inputs and outputs</Message>
		</Event>
		<Event>
			<Id>8476</Id>
			<Message LcId="1033">On the {0}. connection the PROFIsafe Slave has been restarted locally</Message>
		</Event>
		<Event>
			<Id>12288</Id>
			<Message LcId="1033">The received number of groups ({0}) was too big, the maximum allowed value is {1}</Message>
		</Event>
		<Event>
			<Id>12289</Id>
			<Message LcId="1033">The received number of FBs ({0}) was too big, the maximum allowed value is {1}</Message>
		</Event>
		<Event>
			<Id>12290</Id>
			<Message LcId="1033">The received number of Connections ({0}) was too big, the maximum allowed value is {1}</Message>
		</Event>
		<Event>
			<Id>12291</Id>
			<Message LcId="1033">The received number of Output Mappings was too big, the maximum allowed value is {0}</Message>
		</Event>
		<Event>
			<Id>12292</Id>
			<Message LcId="1033">The received number of Input Mappings was too big, the maximum allowed value is {0}</Message>
		</Event>
		<Event>
			<Id>12293</Id>
			<Message LcId="1033">The received size of Standard Inputs ({0}) was too big, the maximum allowed value is {1}</Message>
		</Event>
		<Event>
			<Id>12294</Id>
			<Message LcId="1033">The received size of Standard Outputs ({0}) was too big, the maximum allowed value is {1}</Message>
		</Event>
		<Event>
			<Id>12295</Id>
			<Message LcId="1033">The received number of Restore Slaves ({0}) was too big, the maximum allowed value is {1}</Message>
		</Event>
		<Event>
			<Id>12296</Id>
			<Message LcId="1033">The SafeCfgData type was unexpected: {0} found and {1} expected</Message>
		</Event>
		<Event>
			<Id>12297</Id>
			<Message LcId="1033">The SafeCfgData type 2 (Connection) was expected at offset {0}</Message>
		</Event>
		<Event>
			<Id>12298</Id>
			<Message LcId="1033">The SafeCfgData type 3 (FB) was expected at offset {0}</Message>
		</Event>
		<Event>
			<Id>12299</Id>
			<Message LcId="1033">The SafeCfgData type 15 (GAP) was expected at offset {0}</Message>
		</Event>
		<Event>
			<Id>12300</Id>
			<Message LcId="1033">The Bit-Mask in the SafeCfgData was wrong at offset {0}</Message>
		</Event>
		<Event>
			<Id>12301</Id>
			<Message LcId="1033">The address in the SafeCfgData was wrong at offset {0}</Message>
		</Event>
		<Event>
			<Id>12302</Id>
			<Message LcId="1033">The Signal number in the SafeCfgData was wrong at offset {0}</Message>
		</Event>
		<Event>
			<Id>12303</Id>
			<Message LcId="1033">The number of connections was wrong in the SafeCfgData of the Group at offset {0}</Message>
		</Event>
		<Event>
			<Id>12304</Id>
			<Message LcId="1033">The number of FBs was wrong in the SafeCfgData of the Group at offset {0}</Message>
		</Event>
		<Event>
			<Id>12305</Id>
			<Message LcId="1033">The size of the SafeCfgData was wrong at offset {0}</Message>
		</Event>
		<Event>
			<Id>12306</Id>
			<Message LcId="1033">The complete size of the SafeCfgData related to the Group {0} was wrong</Message>
		</Event>
		<Event>
			<Id>12307</Id>
			<Message LcId="1033">If the RUN-Signal should be mapped internally, it has to be activated at offset {0}</Message>
		</Event>
		<Event>
			<Id>12308</Id>
			<Message LcId="1033">The message size at offset {0} is invalid</Message>
		</Event>
		<Event>
			<Id>12309</Id>
			<Message LcId="1033">The connection parameter at offset {0} is invalid</Message>
		</Event>
		<Event>
			<Id>12310</Id>
			<Message LcId="1033">If the ERRACK-Signal should be mapped internally, it has to be activated at offset {0}</Message>
		</Event>
		<Event>
			<Id>12311</Id>
			<Message LcId="1033">The connection type at offset {0} is invalid</Message>
		</Event>
		<Event>
			<Id>12312</Id>
			<Message LcId="1033">The value at offset {0} of the SafeCfgData is invalid</Message>
		</Event>
		<Event>
			<Id>12313</Id>
			<Message LcId="1033">The value at offset {0} of the SafeCfgData is invalid because at least one of the related signals is not active</Message>
		</Event>
		<Event>
			<Id>12314</Id>
			<Message LcId="1033">The number of mappings ({0}) is wrong because it is not the last Mapping SafeCfgData</Message>
		</Event>
		<Event>
			<Id>12315</Id>
			<Message LcId="1033">The Safe Logic Cfg Data were downloaded in the wrong download state ({0})</Message>
		</Event>
		<Event>
			<Id>12316</Id>
			<Message LcId="1033">The number of mappings ({0}) is too great in the Mapping SafeCfgData</Message>
		</Event>
		<Event>
			<Id>12317</Id>
			<Message LcId="1033">The Mapping-Size in the SafeCfgData was wrong at offset {0}</Message>
		</Event>
		<Event>
			<Id>12318</Id>
			<Message LcId="1033">A Group-Input Mapping was expected at offset {0}</Message>
		</Event>
		<Event>
			<Id>12319</Id>
			<Message LcId="1033">A Connection-Input Mapping was expected at offset {0}</Message>
		</Event>
		<Event>
			<Id>12320</Id>
			<Message LcId="1033">A FB-Input Bit-Mapping was expected at offset {0}</Message>
		</Event>
		<Event>
			<Id>12321</Id>
			<Message LcId="1033">A FB-Input Byte-Mapping was expected at offset {0}</Message>
		</Event>
		<Event>
			<Id>12322</Id>
			<Message LcId="1033">No more mapping was expected at offset {0}</Message>
		</Event>
		<Event>
			<Id>12323</Id>
			<Message LcId="1033">Invalid Safe User Parameter size at byte offset 0x{0,x} (Found={1}, Expected={2})</Message>
		</Event>
		<Event>
			<Id>12324</Id>
			<Message LcId="1033">The SafeCfgData type 4 (Safe User Parameter) was expected at offset {0}</Message>
		</Event>
		<Event>
			<Id>12325</Id>
			<Message LcId="1033">The download of the Input Mapping Cfg Data was refused because {0} groups were missing in the Safe Logic Cfg Data</Message>
		</Event>
		<Event>
			<Id>12326</Id>
			<Message LcId="1033">The download of the Input Mapping Cfg Data was refused because {0} connections were missing in the Safe Logic Cfg Data</Message>
		</Event>
		<Event>
			<Id>12327</Id>
			<Message LcId="1033">The download of the Input Mapping Cfg Data was refused because {0} FBs were missing in the Safe Logic Cfg Data</Message>
		</Event>
		<Event>
			<Id>12328</Id>
			<Message LcId="1033">At least one group has to be defined in the SafeCfgData</Message>
		</Event>
		<Event>
			<Id>12329</Id>
			<Message LcId="1033">The download of the Input Mapping Cfg Data was refused because no safe Logic Cfg Data were downloaded before</Message>
		</Event>
		<Event>
			<Id>12330</Id>
			<Message LcId="1033">The Subindex {0} was expected to be downloaded</Message>
		</Event>
		<Event>
			<Id>12331</Id>
			<Message LcId="1033">When loading CfgData a user has to be logged in before</Message>
		</Event>
		<Event>
			<Id>12332</Id>
			<Message LcId="1033">The Input Mapping Cfg Data were downloaded in the wrong download state ({0})</Message>
		</Event>
		<Event>
			<Id>12333</Id>
			<Message LcId="1033">The download of theSafe Logic CfgData is refused because the old Safe Logic Cfg Data were not deleted before</Message>
		</Event>
		<Event>
			<Id>12334</Id>
			<Message LcId="1033">The user was logged out before</Message>
		</Event>
		<Event>
			<Id>12335</Id>
			<Message LcId="1033">The user has not sufficient access rights</Message>
		</Event>
		<Event>
			<Id>12336</Id>
			<Message LcId="1033">The reserved area of the CfgData was not 0</Message>
		</Event>
		<Event>
			<Id>12337</Id>
			<Message LcId="1033">The CRC of the CfgData was wrong</Message>
		</Event>
		<Event>
			<Id>12338</Id>
			<Message LcId="1033">All needed CfgData pages were downloaded before, no more pages are expected</Message>
		</Event>
		<Event>
			<Id>12339</Id>
			<Message LcId="1033">The mapping code buffer is too small for the mapping (Offset: 0x{0,x}, Size: {1})</Message>
		</Event>
		<Event>
			<Id>12340</Id>
			<Message LcId="1033">The maximum allowed subindex is {0}</Message>
		</Event>
		<Event>
			<Id>12341</Id>
			<Message LcId="1033">The download of the Output Mapping Cfg Data was refused because {0} mappings of the Input Mapping Cfg Data were missing</Message>
		</Event>
		<Event>
			<Id>12342</Id>
			<Message LcId="1033">{0} input mappings of the groups were missing in the Input Mapping Cfg Data</Message>
		</Event>
		<Event>
			<Id>12343</Id>
			<Message LcId="1033">{0} input mappings of the connections were missing in the Input Mapping Cfg Data</Message>
		</Event>
		<Event>
			<Id>12344</Id>
			<Message LcId="1033">{0} input bit mappings of the FBs were missing in the Input Mapping Cfg Data</Message>
		</Event>
		<Event>
			<Id>12345</Id>
			<Message LcId="1033">{0} input byte mappings of the FBs were missing in the Input Mapping Cfg Data</Message>
		</Event>
		<Event>
			<Id>12346</Id>
			<Message LcId="1033">The Output Mapping Cfg Data were downloaded in the wrong download state ({0})</Message>
		</Event>
		<Event>
			<Id>12347</Id>
			<Message LcId="1033">The mapping code buffer is too small for the local mapping</Message>
		</Event>
		<Event>
			<Id>12348</Id>
			<Message LcId="1033">The download of the Safe Parameter was refused because no Output Mapping Cfg Data were downloaded before</Message>
		</Event>
		<Event>
			<Id>12349</Id>
			<Message LcId="1033">The download of the Safe User Parameter was refused because {0} mappings of the Output Mapping Cfg Data were missing</Message>
		</Event>
		<Event>
			<Id>12350</Id>
			<Message LcId="1033">The Safe User Parameter Cfg Data were downloaded in the wrong download state ({0})</Message>
		</Event>
		<Event>
			<Id>12351</Id>
			<Message LcId="1033">The download of the Activate Project Cfg Data was refused because no Safe User Parameter Cfg Data were downloaded before</Message>
		</Event>
		<Event>
			<Id>12352</Id>
			<Message LcId="1033">The download of the Activate Project Cfg Data was refused because {0} bytes of the Safe Parameter Cfg Data were missing</Message>
		</Event>
		<Event>
			<Id>12353</Id>
			<Message LcId="1033">The received activate code (0x{0,x}) was wrong in the Project Cfg Data</Message>
		</Event>
		<Event>
			<Id>12354</Id>
			<Message LcId="1033">The TwinSAFE Address ({0}) in the Project Cfg Data does not match with the DIP switch ({1})</Message>
		</Event>
		<Event>
			<Id>12355</Id>
			<Message LcId="1033">At least one Cfg Data page has to be defined in the Safe Logic Cfg Data</Message>
		</Event>
		<Event>
			<Id>12356</Id>
			<Message LcId="1033">The maximum number ({0}) of Cfg Data pages was exceeded in the Safe Logic Cfg Data</Message>
		</Event>
		<Event>
			<Id>12357</Id>
			<Message LcId="1033">The received number of Safe Logic Cfg Data pages ({0}) has exceeded the configured value at offset 0 of the Safe Logic Cfg Data ({1})</Message>
		</Event>
		<Event>
			<Id>12358</Id>
			<Message LcId="1033">The download of the Input Mapping Cfg Data was refused because {0} pages were missing in the Safe Logic Cfg Data</Message>
		</Event>
		<Event>
			<Id>12359</Id>
			<Message LcId="1033">The Safe Logic Cfg Data CRC does not match in the Safe Project Cfg Data</Message>
		</Event>
		<Event>
			<Id>12360</Id>
			<Message LcId="1033">When checking the Mapping Code a fault has detected at offset 0x{0,x}</Message>
		</Event>
		<Event>
			<Id>12361</Id>
			<Message LcId="1033">The Mapping Cfg Data CRC does not match in the Safe Project Cfg Data</Message>
		</Event>
		<Event>
			<Id>12362</Id>
			<Message LcId="1033">The number of Input Mappings is too small in the Safe Project Cfg Data (Code-Offset=0x{0,x})</Message>
		</Event>
		<Event>
			<Id>12363</Id>
			<Message LcId="1033">The number of Output Mappings is too small in the Safe Project Cfg Data (Code-Offset=0x{0,x})</Message>
		</Event>
		<Event>
			<Id>12364</Id>
			<Message LcId="1033">The number of Input Mappings is too great in the Safe Project Cfg Data, ({0} mappings too much, Code-Offset=0x{1,x})</Message>
		</Event>
		<Event>
			<Id>12365</Id>
			<Message LcId="1033">The number of Output Mappings is too great in the Safe Project Cfg Data, ({0} mappings too much, Code-Offset=0x{1,x})</Message>
		</Event>
		<Event>
			<Id>12366</Id>
			<Message LcId="1033">The maximum number ({0}) of Cfg Data pages was exceeded in the Safe User Parameter Cfg Data</Message>
		</Event>
		<Event>
			<Id>12367</Id>
			<Message LcId="1033">At least one Cfg Data page has to be defined in the Safe User Parameter Cfg Data</Message>
		</Event>
		<Event>
			<Id>12368</Id>
			<Message LcId="1033">The Safe User Parameter Cfg Data CRC does not match in the Safe Project Cfg Data</Message>
		</Event>
		<Event>
			<Id>12370</Id>
			<Message LcId="1033">The calculated local process image size ({0}) exceeded the maximum local process image size of {1}</Message>
		</Event>
		<Event>
			<Id>12371</Id>
			<Message LcId="1033">The Activate Project Cfg Data were downloaded in the wrong download state ({0})</Message>
		</Event>
		<Event>
			<Id>12372</Id>
			<Message LcId="1033">The Delete Project Cfg Data were downloaded in the wrong download state ({0})</Message>
		</Event>
		<Event>
			<Id>12373</Id>
			<Message LcId="1033">The TwinSAFE Address ({0}) does not match with the DIP switch ({1}) in the Delete Project Cfg Data</Message>
		</Event>
		<Event>
			<Id>12374</Id>
			<Message LcId="1033">The Delete Code ({0}) is too high in the Delete Project Cfg Data</Message>
		</Event>
		<Event>
			<Id>12375</Id>
			<Message LcId="1033">Unexpected connection index in the Safe User Parameter Cfg Data at byte offset 0x{0,x}</Message>
		</Event>
		<Event>
			<Id>12376</Id>
			<Message LcId="1033">The received number of Local Safety Inputs ({0}) was wrong, the expected value is {1}</Message>
		</Event>
		<Event>
			<Id>12377</Id>
			<Message LcId="1033">The received number of Local Safety Outputs ({0}) was wrong, the expected value is {1}</Message>
		</Event>
		<Event>
			<Id>12378</Id>
			<Message LcId="1033">The received number of Local Standard Inputs ({0}) was wrong, the expected value is {1}</Message>
		</Event>
		<Event>
			<Id>12379</Id>
			<Message LcId="1033">The received number of Local Standard Outputs ({0}) was wrong, the expected value is {1}</Message>
		</Event>
		<Event>
			<Id>12380</Id>
			<Message LcId="1033">The received Safety Input Message size at word offset 15 of the Safe Logic Cfg Data ({0}) is unequal the calculated value of {1}</Message>
		</Event>
		<Event>
			<Id>12381</Id>
			<Message LcId="1033">The received Safety Output Message size at word offset 16 of the Safe Logic Cfg Data ({0}) is unequal the calculated value of {1}</Message>
		</Event>
		<Event>
			<Id>12382</Id>
			<Message LcId="1033">The received Safety Input size at word offset 7 of the Safe Logic Cfg Data ({0}) is unequal the calculated value of {1}</Message>
		</Event>
		<Event>
			<Id>12383</Id>
			<Message LcId="1033">The received Safety Output size at word offset 8 of the Safe Logic Cfg Data ({0}) is unequal the calculated value of {1}</Message>
		</Event>
		<Event>
			<Id>12384</Id>
			<Message LcId="1033">The received PROFIsafe Input Message size at word offset 9 of the Safe Logic Cfg Data ({0}) is unequal the calculated value of {1}</Message>
		</Event>
		<Event>
			<Id>12385</Id>
			<Message LcId="1033">The received PROFIsafe Output Message size at word offset 10 of the Safe Logic Cfg Data ({0}) is unequal the calculated value of {1}</Message>
		</Event>
		<Event>
			<Id>12386</Id>
			<Message LcId="1033">At word offset 0x{0,x} the configured number of CRCs of {1} exceeds the maximum number of CRCs ({2})</Message>
		</Event>
		<Event>
			<Id>12387</Id>
			<Message LcId="1033">The received SafeUserParameterSizeInFrame ({0}) was wrong, the expected value is {1}</Message>
		</Event>
		<Event>
			<Id>12388</Id>
			<Message LcId="1033">The received FB Analog Input size at word offset 13 of the Safe Logic Cfg Data ({0}) is unequal the calculated value of {1}</Message>
		</Event>
		<Event>
			<Id>12389</Id>
			<Message LcId="1033">The received FB Analog Output size at word offset 14 of the Safe Logic Cfg Data ({0}) is unequal the calculated value of {1}</Message>
		</Event>
		<Event>
			<Id>12390</Id>
			<Message LcId="1033">The received Connection Status Data size at word offset 21 of the Safe Logic Cfg Data ({0}) is unequal the calculated value of {1}</Message>
		</Event>
		<Event>
			<Id>12391</Id>
			<Message LcId="1033">The received FB Status Data size at word offset 22 of the Safe Logic Cfg Data ({0}) is unequal the calculated value of {1}</Message>
		</Event>
		<Event>
			<Id>12392</Id>
			<Message LcId="1033">The number of active signals in the FB is invalid at offset {0}</Message>
		</Event>
		<Event>
			<Id>12393</Id>
			<Message LcId="1033">The local map code size in the FB is invalid at offset {0}</Message>
		</Event>
		<Event>
			<Id>12394</Id>
			<Message LcId="1033">The analog output size in the Group Cfg Data is invalid at offset {0}</Message>
		</Event>
		<Event>
			<Id>12395</Id>
			<Message LcId="1033">The analog output offset in the Group Cfg Data is invalid at offset {0}</Message>
		</Event>
		<Event>
			<Id>12396</Id>
			<Message LcId="1033">The received FB Analog Output size at word offset 14 of the Safe Logic Cfg Data ({0}) is unequal the calculated value over all the Group Cfg Data ({1})</Message>
		</Event>
		<Event>
			<Id>12397</Id>
			<Message LcId="1033">The calculated end of the analog output area ({0}) is unequal the calculated analog output offset over all the Group Cfg Data ({1})</Message>
		</Event>
		<Event>
			<Id>12398</Id>
			<Message LcId="1033">The value of the FB Cfg Data at offset {0} is invalid</Message>
		</Event>
		<Event>
			<Id>12399</Id>
			<Message LcId="1033">At least one FB input has to be deactivated in this operation mode at offset {0}</Message>
		</Event>
		<Event>
			<Id>12400</Id>
			<Message LcId="1033">At least the level of one FB input is wrong in this operation mode at offset {0}</Message>
		</Event>
		<Event>
			<Id>12401</Id>
			<Message LcId="1033">The value of the FB Cfg Data at word offset {0} is invalid in this operation mode</Message>
		</Event>
		<Event>
			<Id>12402</Id>
			<Message LcId="1033">The number ({0}) of Cfg Data pages was exceeded in the Info Data Cfg Data at offset 0</Message>
		</Event>
		<Event>
			<Id>12403</Id>
			<Message LcId="1033">The received number of FBs ({0}) at word offset 1 was unequal the configured number of FBs of {1}</Message>
		</Event>
		<Event>
			<Id>12404</Id>
			<Message LcId="1033">The received FB Status Data Size ({0}) in the Info Data Map Cfg Data at byte offset {1} is unequal the calculated FB Status Data size of {2}</Message>
		</Event>
		<Event>
			<Id>12405</Id>
			<Message LcId="1033">The received FB Diag Data Size ({0}) in the Info Data Map Cfg Data at byte offset {1} is unequal the calculated FB Diag Data size of {2}</Message>
		</Event>
		<Event>
			<Id>12406</Id>
			<Message LcId="1033">The received number of Connections ({0}) in the Info Data Cfg Data at word offset {1} was unequal the configured number of connections of {2}</Message>
		</Event>
		<Event>
			<Id>12407</Id>
			<Message LcId="1033">The received Connection Type ({0}) in the Info Data Map Cfg Data at byte offset {1} is unequal the configured Connection Type of {2}</Message>
		</Event>
		<Event>
			<Id>12408</Id>
			<Message LcId="1033">The FB Diag Data Map in the Info Data Map Cfg Data was wrong at byte offset {0} (bit 7=1 and bit 6=0 is not allowed)</Message>
		</Event>
		<Event>
			<Id>12409</Id>
			<Message LcId="1033">The received number of Groups ({0}) in the Info Data Cfg Data at word offset {1} was unequal the configured number of Groups of {2}</Message>
		</Event>
		<Event>
			<Id>12410</Id>
			<Message LcId="1033">The FB-Type is unknown at offset 0x{0,x}</Message>
		</Event>
		<Event>
			<Id>12411</Id>
			<Message LcId="1033">The value at offset {0} of the SafeCfgData is too great</Message>
		</Event>
		<Event>
			<Id>12412</Id>
			<Message LcId="1033">The value at offset {0} of the SafeCfgData is too small</Message>
		</Event>
		<Event>
			<Id>12413</Id>
			<Message LcId="1033">FB-Muting: if SequentialInputs is TRUE, all MuteIn signals have to be active at offset 0x{0,x}</Message>
		</Event>
		<Event>
			<Id>12414</Id>
			<Message LcId="1033">The type of the analog inputs has to be the same at offset 0x{0,x}</Message>
		</Event>
		<Event>
			<Id>12415</Id>
			<Message LcId="1033">The received size of the local safe user parameter ({0}) was wrong, the expected size is {1}</Message>
		</Event>
		<Event>
			<Id>12416</Id>
			<Message LcId="1033">The value at offset {0} of the SafeCfgData is invalid in combination with the value {1} words before in the SafeCfgData</Message>
		</Event>
		<Event>
			<Id>12417</Id>
			<Message LcId="1033">The received size of the FB Parameter Data at word offset 25 of the Safe Logic Cfg Data ({0}) is unequal the calculated value of {1}</Message>
		</Event>
		<Event>
			<Id>12418</Id>
			<Message LcId="1033">The FB-Type in the Change FB Parameter Data (FB {0}) is unequal, the expected FB-type is {1}</Message>
		</Event>
		<Event>
			<Id>12419</Id>
			<Message LcId="1033">The size in the Change FB Parameter Data (FB {0}) is unequal, the expected size is {1}</Message>
		</Event>
		<Event>
			<Id>12420</Id>
			<Message LcId="1033">The Setting Mode of the FB CAMMON (FB {0}) in the Change FB Parameter Data is not activated</Message>
		</Event>
		<Event>
			<Id>12421</Id>
			<Message LcId="1033">The actual Logic State ({0}) is unequal RUN (1) when changing FB Parameter Data</Message>
		</Event>
		<Event>
			<Id>12422</Id>
			<Message LcId="1033">The FB-Number ({0}) in the Change FB Parameter Data is invalid</Message>
		</Event>
		<Event>
			<Id>12423</Id>
			<Message LcId="1033">The FRAM data size ({0}) has exceeded, the maximum allowed value is {1}</Message>
		</Event>
		<Event>
			<Id>12424</Id>
			<Message LcId="1033">The Safe User Parameter in the Change FB Parameter Data are not supported</Message>
		</Event>
		<Event>
			<Id>12425</Id>
			<Message LcId="1033">The size ({0}) of the Change FB Parameter Data is too small, {1} bytes are expected</Message>
		</Event>
		<Event>
			<Id>12426</Id>
			<Message LcId="1033">The type ({0}) of the Safe User Parameter in the Change FB Parameter Data is wrong</Message>
		</Event>
		<Event>
			<Id>12427</Id>
			<Message LcId="1033">The size ({0}) of the Safe User Parameter in the Change FB Parameter Data is wrong, the expected size is {1}</Message>
		</Event>
		<Event>
			<Id>12428</Id>
			<Message LcId="1033">The offset of the Cyclic FRAM Data was wrong at offset {0}</Message>
		</Event>
		<Event>
			<Id>12429</Id>
			<Message LcId="1033">No Local Input bytes configured for Extended Info Data Mapping</Message>
		</Event>
		<Event>
			<Id>12430</Id>
			<Message LcId="1033">No Local Output bytes configured for Extended Info Data Mapping</Message>
		</Event>
		<Event>
			<Id>12431</Id>
			<Message LcId="1033">Too much Local Input bytes configured for Info Data, only 31 bytes are allowed</Message>
		</Event>
		<Event>
			<Id>12432</Id>
			<Message LcId="1033">Too much Local Output bytes configured for Info Data, only 31 bytes are allowed</Message>
		</Event>
		<Event>
			<Id>12436</Id>
			<Message LcId="1033">The size 0 is not allowed for the safe user parameter at word offset {0}</Message>
		</Event>
		<Event>
			<Id>12437</Id>
			<Message LcId="1033">The download of the Activate Project Cfg Data was refused because no Output Mapping Cfg Data were downloaded before</Message>
		</Event>
		<Event>
			<Id>12438</Id>
			<Message LcId="1033">The download of the Activate Project Cfg Data was refused because {0} mappings of the Output Mapping Cfg Data were missing</Message>
		</Event>
		<Event>
			<Id>12439</Id>
			<Message LcId="1033">The re-converted FB-Mapping-Code was not matching to the FB Cfg Data (FB: {0}, Code-Address: 0x{1,x}, Offset: 0x{2,x})</Message>
		</Event>
		<Event>
			<Id>12440</Id>
			<Message LcId="1033">a destination was mapped twice in the bit mapping code (page: 0x{0,x}, Code-Address: 0x{1,x})</Message>
		</Event>
		<Event>
			<Id>12441</Id>
			<Message LcId="1033">a destination was mapped twice in the byte mapping code (Page: 0x{0,x}, Code-Address: 0x{1,x})</Message>
		</Event>
		<Event>
			<Id>12442</Id>
			<Message LcId="1033">the number of groups was exceeded in the Vendor Data (actual value: {0}, minimum: {1}, maximum: {2})</Message>
		</Event>
		<Event>
			<Id>12443</Id>
			<Message LcId="1033">the number of FBs was exceeded in the Vendor Data (actual value: {0}, minimum: {1}, maximum: {2})</Message>
		</Event>
		<Event>
			<Id>12444</Id>
			<Message LcId="1033">the number of Connections was exceeded in the Vendor Data (actual value: {0}, minimum: {1}, maximum: {2})</Message>
		</Event>
		<Event>
			<Id>12445</Id>
			<Message LcId="1033">the number of Standard Inputs was exceeded in the Vendor Data (actual value: {0}, minimum: {1}, maximum: {2})</Message>
		</Event>
		<Event>
			<Id>12446</Id>
			<Message LcId="1033">the number of Standard Outputs was exceeded in the Vendor Data (actual value: {0}, minimum: {1}, maximum: {2})</Message>
		</Event>
		<Event>
			<Id>12447</Id>
			<Message LcId="1033">the FSoE message size was exceeded in the Vendor Data (actual value: {0}, minimum: {1}, maximum: {2})</Message>
		</Event>
		<Event>
			<Id>12448</Id>
			<Message LcId="1033">the FSoE safe user parameter size was exceeded in the Vendor Data (actual value: {0}, minimum: {1}, maximum: {2})</Message>
		</Event>
		<Event>
			<Id>12449</Id>
			<Message LcId="1033">the PROFIsafe message size was exceeded in the Vendor Data (actual value: {0}, minimum: {1}, maximum: {2})</Message>
		</Event>
		<Event>
			<Id>12450</Id>
			<Message LcId="1033">the EtherCAT Output size was exceeded in the Vendor Data (actual value: {0}, minimum: {1}, maximum: {2})</Message>
		</Event>
		<Event>
			<Id>12451</Id>
			<Message LcId="1033">the EtherCAT Input size was exceeded in the Vendor Data (actual value: {0}, minimum: {1}, maximum: {2})</Message>
		</Event>
		<Event>
			<Id>12452</Id>
			<Message LcId="1033">the EtherCAT Output size was exceeded in the project (calculated value: {0}, maximum value: {1})</Message>
		</Event>
		<Event>
			<Id>12453</Id>
			<Message LcId="1033">the EtherCAT Input size was exceeded in the project (calculated value: {0}, maximum value: {1})</Message>
		</Event>
		<Event>
			<Id>12454</Id>
			<Message LcId="1033">when re-converting the local FB mapping code (FB {0}) the analog destination address was below the minimum value (Code-Offset: 0x{1,x}, Data-Offset: 0x{2,x})</Message>
		</Event>
		<Event>
			<Id>12455</Id>
			<Message LcId="1033">when re-converting the local FB mapping code (FB {0}) the analog destination address was above the maximum value (Code-Offset: 0x{1,x}, Data-Offset: 0x{2,x})</Message>
		</Event>
		<Event>
			<Id>12456</Id>
			<Message LcId="1033">when re-converting the local FB mapping code (FB {0}) the destination address was not found (Code-Offset: 0x{1,x}, Data-Offset: 0x{2,x})</Message>
		</Event>
		<Event>
			<Id>12457</Id>
			<Message LcId="1033">when re-converting the local FB mapping code (FB {0}) the digital destination address was below the minimum value (Code-Offset: 0x{1,x}, Data-Offset: 0x{2,x})</Message>
		</Event>
		<Event>
			<Id>12458</Id>
			<Message LcId="1033">when re-converting the local FB mapping code (FB {0}) the digital destination address was above the maximum value (Code-Offset: 0x{1,x}, Data-Offset: 0x{2,x})</Message>
		</Event>
		<Event>
			<Id>12459</Id>
			<Message LcId="1033">when re-converting the local FB mapping code (FB {0}) the generated mapping data size was wrong (Code-Offset: 0x{1,x})</Message>
		</Event>
		<Event>
			<Id>12460</Id>
			<Message LcId="1033">the Project CRC in the Activate Project Cfg Data was wrong</Message>
		</Event>
		<Event>
			<Id>12461</Id>
			<Message LcId="1033">when re-converting the local FB mapping code the source bit address was wrong (FB: {0}, Code-Offset: 0x{1,x})</Message>
		</Event>
		<Event>
			<Id>12462</Id>
			<Message LcId="1033">when re-converting the local FB mapping code the source byte address was wrong (FB: {0}, Code-Offset: 0x{1,x})</Message>
		</Event>
		<Event>
			<Id>12465</Id>
			<Message LcId="1033">wrong subindex order when reading the input mapping cfg data, the expected subindex is {0}</Message>
		</Event>
		<Event>
			<Id>12466</Id>
			<Message LcId="1033">subindex exceeded when reading the cfg data</Message>
		</Event>
		<Event>
			<Id>12467</Id>
			<Message LcId="1033">the offset in the Replacement Values cfg data is wrong in the Group cfg data at word-offset 0x{0,x}</Message>
		</Event>
		<Event>
			<Id>12468</Id>
			<Message LcId="1033">the deactivation mode passivate is enabled and the number of connections is unequal 1 in the Group cfg data at word-offset 0x{0,x}</Message>
		</Event>
		<Event>
			<Id>12469</Id>
			<Message LcId="1033">the RUN-signal has to be active in the Group cfg data at word-offset 0x{0,x}</Message>
		</Event>
		<Event>
			<Id>12470</Id>
			<Message LcId="1033">in the Change FB-Parameter (FB {0}) the FB-type {1} is not supported</Message>
		</Event>
		<Event>
			<Id>12471</Id>
			<Message LcId="1033">the Subindex exceeds the number of connections ({0}) when writing the PROFIsafe F-Parameter</Message>
		</Event>
		<Event>
			<Id>12472</Id>
			<Message LcId="1033">the Connection-Type {0} does not support PROFIsafe F-Parameter</Message>
		</Event>
		<Event>
			<Id>12473</Id>
			<Message LcId="1033">the Subindex exceeds the number of connections ({0}) when writing the Store Slave Project CRC Parameter</Message>
		</Event>
		<Event>
			<Id>12474</Id>
			<Message LcId="1033">the Connection-Type {0} does not support Store Slave Project CRC Parameter</Message>
		</Event>
		<Event>
			<Id>12475</Id>
			<Message LcId="1033">if there are no Muting sensors behind the AOPD, the Backwards-Mode and optional Check of the OSSD inputs are not allowed</Message>
		</Event>
		<Event>
			<Id>12476</Id>
			<Message LcId="1033">when optional Check of the OSSD inputs is activated, the Sequential Inputs mode has to be activated too</Message>
		</Event>
		<Event>
			<Id>12477</Id>
			<Message LcId="1033">The number of Connections ({0}) is unequal the calculated number of connections over all groups ({1})</Message>
		</Event>
		<Event>
			<Id>12478</Id>
			<Message LcId="1033">The number of FBs ({0}) is unequal the calculated number of FBs over all groups ({1})</Message>
		</Event>
		<Event>
			<Id>12479</Id>
			<Message LcId="1033">The calculated local near process image size ({0}) exceeded the maximum near local process image size of {1}</Message>
		</Event>
		<Event>
			<Id>12480</Id>
			<Message LcId="1033">the EtherCAT Output size was exceeded in the connection cfg data at word offset 0x{0,x} (calculated value: {1}, maximum value: {2})</Message>
		</Event>
		<Event>
			<Id>12481</Id>
			<Message LcId="1033">the EtherCAT Input size was exceeded in the connection cfg data at word offset 0x{0,x} (calculated value: {1}, maximum value: {2})</Message>
		</Event>
		<Event>
			<Id>12482</Id>
			<Message LcId="1033">the reserved bits in the flags of the Vendor Data were set (actual value: 0x{0,x}, reserved flags: 0x{1,x})</Message>
		</Event>
		<Event>
			<Id>12483</Id>
			<Message LcId="1033">FB CAMMON: if the Setting Mode is enabled, at least one position marker has to be configured in the cfg data</Message>
		</Event>
		<Event>
			<Id>12484</Id>
			<Message LcId="1033">Connection Type is not supported at word-offset 0x{0,x} of the cfg data</Message>
		</Event>
		<Event>
			<Id>12485</Id>
			<Message LcId="1033">writing the PROFIsafe F-Parameter is not allowed in this logic state ({0}), the logic state has to be 1 (RUN)</Message>
		</Event>
		<Event>
			<Id>12486</Id>
			<Message LcId="1033">The ConnId 0x{0,x} is used at least twice</Message>
		</Event>
		<Event>
			<Id>12487</Id>
			<Message LcId="1033">The PROFIsafe Address 0x{0,x} is used at least twice</Message>
		</Event>
		<Event>
			<Id>12488</Id>
			<Message LcId="1033">The FSoE Address 0x{0,x} is used at least twice</Message>
		</Event>
		<Event>
			<Id>12489</Id>
			<Message LcId="1033">The TwinSAFE SC type {0} is used at least twice</Message>
		</Event>
		<Event>
			<Id>12490</Id>
			<Message LcId="1033">The TwinSAFE SC CRC 0x{0,x} is used at least twice</Message>
		</Event>
		<Event>
			<Id>12491</Id>
			<Message LcId="1033">The Connection Index {0} in a FB Connection Shutdown is used at least twice</Message>
		</Event>
		<Event>
			<Id>12492</Id>
			<Message LcId="1033">It is not allowed that the number of FBs and the number of Connections is zero inside the Group Cfg Data</Message>
		</Event>
		<Event>
			<Id>12493</Id>
			<Message LcId="1033">the storing of the Store Slave Project CRC Parameter is not supported in connection {0}</Message>
		</Event>
		<Event>
			<Id>12494</Id>
			<Message LcId="1033">The received size of Safety Input Messages ({0}) was too big, the maximum allowed value is {1}</Message>
		</Event>
		<Event>
			<Id>12495</Id>
			<Message LcId="1033">The received size of Safety Output Messages ({0}) was too big, the maximum allowed value is {1}</Message>
		</Event>
		<Event>
			<Id>12496</Id>
			<Message LcId="1033">The received size of PROFIsafe Input Messages ({0}) was too big, the maximum allowed value is {1}</Message>
		</Event>
		<Event>
			<Id>12497</Id>
			<Message LcId="1033">The received size of PROFIsafe Output Messages ({0}) was too big, the maximum allowed value is {1}</Message>
		</Event>
		<Event>
			<Id>12498</Id>
			<Message LcId="1033">The Restore Mode is supported on a TwinSAFE SC connection at word-offset 0x{0,x}</Message>
		</Event>
		<Event>
			<Id>12499</Id>
			<Message LcId="1033">The FB {0} (Connection Shutdown) is assigned to a non FSoE-connection</Message>
		</Event>
		<Event>
			<Id>12500</Id>
			<Message LcId="1033">The download of the TwinSAFE IO-Project failed because {0} FBs are configured (no FBs allowed)</Message>
		</Event>
		<Event>
			<Id>12501</Id>
			<Message LcId="1033">When the TwinSAFE-Address in the Project Cfg data should be used, it has to be unequal zero</Message>
		</Event>
		<Event>
			<Id>12502</Id>
			<Message LcId="1033">When the TwinSAFE-Address in the Project Cfg data should be used, the DIP-switch has to be zero (0x{0,x} found)</Message>
		</Event>
		<Event>
			<Id>12503</Id>
			<Message LcId="1033">Read aborted because of invalid code buffer offset (Calculated=0x{0,x}, Expected=0x{1,x})</Message>
		</Event>
		<Event>
			<Id>12504</Id>
			<Message LcId="1033">Invalid Safe User Parameter Offset at word offset 0x{0,x} (Calculated=0x{1,x}, Expected=0x{2,x})</Message>
		</Event>
		<Event>
			<Id>12505</Id>
			<Message LcId="1033">The Standard Inputs Size of zero is not allowed</Message>
		</Event>
		<Event>
			<Id>12506</Id>
			<Message LcId="1033">The download of the Replacement Values is not allowed after the download before (download state={0})</Message>
		</Event>
		<Event>
			<Id>12507</Id>
			<Message LcId="1033">The Info Data Map Cfg Data were downloaded in the wrong download state ({0})</Message>
		</Event>
		<Event>
			<Id>12508</Id>
			<Message LcId="1033">The offset for the safety-Timer has to be inside the safety Output Area from 0x{0,x} to 0x{1,x}</Message>
		</Event>
		<Event>
			<Id>12509</Id>
			<Message LcId="1033">The safety input size of connection {0} is zero offset, the Safety Inputs cannot be mapped at byte offset 0x{1,x} of Info Data Map Cfg Data</Message>
		</Event>
		<Event>
			<Id>12510</Id>
			<Message LcId="1033">The safety output size of connection {0} is zero, the Safety Outputs cannot be mapped at byte offset 0x{1,x} of Info Data Map Cfg Data</Message>
		</Event>
		<Event>
			<Id>12511</Id>
			<Message LcId="1033">No more safe user parameter expected at byte-offset 0x{0,x} of the Safe User Parameter Cfg Data</Message>
		</Event>
		<Event>
			<Id>12512</Id>
			<Message LcId="1033">The TwinSAFE Address 0 is not allowed in the Project Cfg Data</Message>
		</Event>
		<Event>
			<Id>12513</Id>
			<Message LcId="1033">The download of the TwinSAFE IO-Project failed because {0} Groups are configured (only 1 Group allowed)</Message>
		</Event>
		<Event>
			<Id>12514</Id>
			<Message LcId="1033">The download of the Delete Project Cfg Data is not allowed in this state ({0})</Message>
		</Event>
		<Event>
			<Id>12515</Id>
			<Message LcId="1033">The destination bit address (0x{0,x}, Bit {1}) already exists in the same mapping code</Message>
		</Event>
		<Event>
			<Id>12516</Id>
			<Message LcId="1033">Local Inputs cannot be mapped in the Info data because no local inputs are existing</Message>
		</Event>
		<Event>
			<Id>12517</Id>
			<Message LcId="1033">Local Outputs cannot be mapped in the Info data because no local outputs are existing</Message>
		</Event>
		<Event>
			<Id>12518</Id>
			<Message LcId="1033">The destination bit address (0x{0,x}, Bit {1}) already exists in the same mapping code</Message>
		</Event>
		<Event>
			<Id>12519</Id>
			<Message LcId="1033">the input mapping cfg data has to be read before the output mapping cfg data</Message>
		</Event>
		<Event>
			<Id>12520</Id>
			<Message LcId="1033">wrong subindex order when reading the mapping cfg data, the expected subindex is {0}</Message>
		</Event>
		<Event>
			<Id>12521</Id>
			<Message LcId="1033">when reading the input mapping cfg data, it has to be started with subindex 1</Message>
		</Event>
		<Event>
			<Id>12522</Id>
			<Message LcId="1033">invalid CRC when checking the Page {0} of the Safe Logic Cfg Data</Message>
		</Event>
		<Event>
			<Id>12523</Id>
			<Message LcId="1033">invalid CRC when checking the Page {0} of the Safe User Parameter Cfg Data</Message>
		</Event>
		<Event>
			<Id>12524</Id>
			<Message LcId="1033">invalid CRC when checking the Page {0} of the Replacement values Cfg Data</Message>
		</Event>
		<Event>
			<Id>12544</Id>
			<Message LcId="1033">No groups defined when trying to activate or deactivate groups</Message>
		</Event>
		<Event>
			<Id>12545</Id>
			<Message LcId="1033">The reserved bits are set in value {0} at offset {1} when trying to activate or deactivate groups</Message>
		</Event>
		<Event>
			<Id>12546</Id>
			<Message LcId="1033">The operation mode at offset {0} is not supported when trying to activate or deactivate groups</Message>
		</Event>
		<Event>
			<Id>12547</Id>
			<Message LcId="1033">The deactivation of groups is not enabled for any group so no replacement values should be downloaded</Message>
		</Event>
		<Event>
			<Id>12548</Id>
			<Message LcId="1033">The maximum number ({0}) of Cfg Data pages was exceeded in the Replacement Values Cfg Data</Message>
		</Event>
		<Event>
			<Id>12549</Id>
			<Message LcId="1033">Invalid FB output size size at offset {0} of the Replacement Values Cfg Data</Message>
		</Event>
		<Event>
			<Id>12550</Id>
			<Message LcId="1033">Unexpected groupindex in the Replacement values Cfg Data at offset 0x{0,x}</Message>
		</Event>
		<Event>
			<Id>12551</Id>
			<Message LcId="1033">The download of the Activate Project Cfg Data was refused because {0} bytes of the Replacement Values Cfg Data were missing</Message>
		</Event>
		<Event>
			<Id>12552</Id>
			<Message LcId="1033">To activate the Group {0} the user has to logged in with access rights Bit 0-15 unequal 0 that the Safe Logic Program will be stopped when logging in</Message>
		</Event>
		<Event>
			<Id>12553</Id>
			<Message LcId="1033">No more definitions of individual replace values for analog FB Outputs in case of Group State unequal RUN are expected at offset {0}</Message>
		</Event>
		<Event>
			<Id>12554</Id>
			<Message LcId="1033">The offset in the definitions of individual replace values for analog FB Outputs in case of Group State unequal RUN was wrong at offset {0}</Message>
		</Event>
		<Event>
			<Id>12555</Id>
			<Message LcId="1033">The source process image offset of the Cyclic FRAM Data is outside the FB analog input area at offset {0}</Message>
		</Event>
		<Event>
			<Id>12556</Id>
			<Message LcId="1033">The source process image offset of the Cyclic FRAM Data has to even at offset {0}</Message>
		</Event>
		<Event>
			<Id>12557</Id>
			<Message LcId="1033">The size of the Cyclic FRAM Data was exceeding at offset {0}</Message>
		</Event>
		<Event>
			<Id>12558</Id>
			<Message LcId="1033">The received size of the Cyclic FRAM Data at word offset 24 of the Safe Logic Cfg Data ({0}) is unequal the calculated value of {1}</Message>
		</Event>
		<Event>
			<Id>12559</Id>
			<Message LcId="1033">The size of the Cyclic FRAM CfgData in the GroupCfgData was not dividable by 4 at offset {0}</Message>
		</Event>
		<Event>
			<Id>12560</Id>
			<Message LcId="1033">The offset of the Cyclic FRAM Data in the GroupCfgData was wrong at offset {0}</Message>
		</Event>
		<Event>
			<Id>12561</Id>
			<Message LcId="1033">The value of {0} at offset {1} is not allowed when trying to activate or deactivate groups</Message>
		</Event>
		<Event>
			<Id>12562</Id>
			<Message LcId="1033">The activating or deactivating of groups is not allowed in PREOP</Message>
		</Event>
		<Event>
			<Id>12563</Id>
			<Message LcId="1033">FB CAMMON (Word-Offset 0x{0,x} of the CfgData): The TDC2UpperLimit ({1}) is lower or equal than the maximum position jitter ({2})</Message>
		</Event>
		<Event>
			<Id>12564</Id>
			<Message LcId="1033">FB CAMMON (Word-Offset 0x{0,x} of the CfgData): The TDCUpperLimit ({1}) is lower or equal than the maximum position jitter ({2})</Message>
		</Event>
		<Event>
			<Id>12565</Id>
			<Message LcId="1033">FB CAMMON (Word-Offset 0x{0,x} of the CfgData): The value of TDCLowerLimit (plus maximum position jitter) ({1}) is bigger or equal the configured position of 360° ({2})</Message>
		</Event>
		<Event>
			<Id>12566</Id>
			<Message LcId="1033">FB CAMMON (Word-Offset 0x{0,x} of the CfgData): The value of BDCUpperLimit (plus twice the maximum position jitter) ({1}) is bigger or equal the value of TDCLowerLimit ({2})</Message>
		</Event>
		<Event>
			<Id>12567</Id>
			<Message LcId="1033">FB CAMMON (Word-Offset 0x{0,x} of the CfgData): The value of BDCUpperLimit ({1}) is smaller or equal the configured value of 180° (plus maximum position jitter) ({2})</Message>
		</Event>
		<Event>
			<Id>12568</Id>
			<Message LcId="1033">FB CAMMON (Word-Offset 0x{0,x} of the CfgData): The value of BDCLowerLimit (plus maximum position jitter) ({1}) is greater or equal the configured value of 180° ({2})</Message>
		</Event>
		<Event>
			<Id>12569</Id>
			<Message LcId="1033">FB CAMMON (Word-Offset 0x{0,x} of the CfgData): The value of OverrunMax (plus twice the maximum position jitter) ({1}) is bigger or equal the value of BDCLowerLimit ({2})</Message>
		</Event>
		<Event>
			<Id>12570</Id>
			<Message LcId="1033">FB CAMMON (Word-Offset 0x{0,x} of the CfgData): The value of TDCUpperLimit (plus twice the maximum position jitter) ({1}) is bigger or equal the value of OverrunMax ({2})</Message>
		</Event>
		<Event>
			<Id>12571</Id>
			<Message LcId="1033">FB CAMMON (Word-Offset 0x{0,x} of the CfgData): The value of TDC1UpperLimit (plus the maximum position jitter) ({1}) is bigger or equal the configured position of 360° ({2})</Message>
		</Event>
		<Event>
			<Id>12572</Id>
			<Message LcId="1033">FB CAMMON (Word-Offset 0x{0,x} of the CfgData): The value of TDC1LowerLimit (plus twice the maximum position jitter) ({1}) is bigger or equal the value of TDC1UpperLimit (5d)</Message>
		</Event>
		<Event>
			<Id>12573</Id>
			<Message LcId="1033">FB CAMMON (Word-Offset 0x{0,x} of the CfgData): The value of TDC2LowerLimit (plus twice the maximum position jitter) ({1}) is bigger or equal the value of BDCLowerLimit ({2})</Message>
		</Event>
		<Event>
			<Id>12574</Id>
			<Message LcId="1033">FB CAMMON (Word-Offset 0x{0,x} of the CfgData): The value of TDC2UpperLimit (plus twice the maximum position jitter) ({1}) is bigger or equal the value of TDC2LowerLimit ({2})</Message>
		</Event>
		<Event>
			<Id>12575</Id>
			<Message LcId="1033">The maximum size of the Replacement Values was exceeded at Word-Offset 0x{0,x} of the Group Cfg Data</Message>
		</Event>
		<Event>
			<Id>12576</Id>
			<Message LcId="1033">If no deactivation mode is enabled the offset of the replacement values shall be zero at Word-Offset 0x{0,x} of the Group Cfg Data</Message>
		</Event>
		<Event>
			<Id>12577</Id>
			<Message LcId="1033">No more replacement values expected at byte-offset 0x{0,x} of the Replacement Values Cfg Data</Message>
		</Event>
		<Event>
			<Id>12578</Id>
			<Message LcId="1033">The Download of the Project CRC is not allowed in PREOP</Message>
		</Event>
		<Event>
			<Id>12800</Id>
			<Message LcId="1033">The PROFIsafe-protocol is not supported on this device</Message>
		</Event>
		<Event>
			<Id>12801</Id>
			<Message LcId="1033">The F_ParVersion in the F_Prm_Flag2 of the F-Parameter at Word-Offset 0x{0,x} is unequal 1 (PROFIsafe V2)</Message>
		</Event>
		<Event>
			<Id>12802</Id>
			<Message LcId="1033">The F_CRC1 of the F-Parameter at Word-Offset 0x{0,x} is wrong</Message>
		</Event>
		<Event>
			<Id>12803</Id>
			<Message LcId="1033">The F_CRC_Length in the F_Prm_Flag1 of the F-Parameter is wrong at Word-Offset 0x{0,x}, the expected value is 0 (3 Bytes CRC2)</Message>
		</Event>
		<Event>
			<Id>12806</Id>
			<Message LcId="1033">The I-Parameter CRC in the F-Parameter is wrong at Word-Offset 0x{0,x}</Message>
		</Event>
		<Event>
			<Id>12807</Id>
			<Message LcId="1033">The F_Block_ID in the F_Prm_Flag2 of the F-Parameter is wrong at Word-Offset 0x{0,x}, the expected value is 0 (No F_iPar_CRC, no F_WD_Time 2) or 1 (F_iPar_CRC, no F_WD_Time 2)</Message>
		</Event>
		<Event>
			<Id>12808</Id>
			<Message LcId="1033">The F_Source_Address in the F-Parameter at Word-Offset 0x{0,x} is outside the allowed area of 1-0xFFFE</Message>
		</Event>
		<Event>
			<Id>12809</Id>
			<Message LcId="1033">The F_Destination_Address in the F-Parameter at Word-Offset 0x{0,x} is outside the allowed area of 1-0xFFFE</Message>
		</Event>
		<Event>
			<Id>12810</Id>
			<Message LcId="1033">The F_WD_Time in the F-parameter at Word-Offset 0x{0,x} is outside the allowed range from 2-60000</Message>
		</Event>
		<Event>
			<Id>12811</Id>
			<Message LcId="1033">The F_Destination_Address in the F-Parameter at Word-Offset 0x{0,x} is wrong, the expected value is {1}</Message>
		</Event>
		<Event>
			<Id>13056</Id>
			<Message LcId="1033">The State OPERATIONAL was left in Restore Mode</Message>
		</Event>
		<Event>
			<Id>13057</Id>
			<Message LcId="1033">Only {0} CRCs were matching in Restore Mode</Message>
		</Event>
		<Event>
			<Id>13058</Id>
			<Message LcId="1033">The CRC of the Activate Project Cfg Data in Restore Mode does not match, the expected value was 0x{0,x}</Message>
		</Event>
		<Event>
			<Id>13059</Id>
			<Message LcId="1033">No RestoreMode Slaves configured when trying to start the Restore Mode</Message>
		</Event>
		<Event>
			<Id>13060</Id>
			<Message LcId="1033">The CRC of the User List Cfg Data was not matching in Restore Mode, the expected value was 0x{0,x}</Message>
		</Event>
		<Event>
			<Id>13061</Id>
			<Message LcId="1033">The download of the User List Cfg Data is not activated in Restore Mode</Message>
		</Event>
		<Event>
			<Id>13062</Id>
			<Message LcId="1033">The download of the User List Cfg Data in Restore-Mode is not allowed in the state {0}</Message>
		</Event>
		<Event>
			<Id>13063</Id>
			<Message LcId="1033">The activation of the TwinSAFE Restore Project is not allowed in the state {0}</Message>
		</Event>
		<Event>
			<Id>13064</Id>
			<Message LcId="1033">The Restore Mode is not supported in EtherCAT state 0x{0,x}</Message>
		</Event>
		<Event>
			<Id>13072</Id>
			<Message LcId="1033">The FSoE-Slave on the {0}. connection is in Restore-Mode</Message>
		</Event>
		<Event>
			<Id>13073</Id>
			<Message LcId="1033">The FSoE-Master on the {0}. connection is in Restore-Mode</Message>
		</Event>
		<Event>
			<Id>13312</Id>
			<Message LcId="1033">The {0}. group has no more errors</Message>
		</Event>
		<Event>
			<Id>13313</Id>
			<Message LcId="1033">The Analog Input at word offset {0} of the analog input process image has expired maximum allowed deviation to the last stored value, received value: {1}, last stored value: {2}</Message>
		</Event>
		<Event>
			<Id>13314</Id>
			<Message LcId="1033">The Wait-Com-Error-Timeout has not been expired when the group {0} should be deactivated in passivate mode</Message>
		</Event>
		<Event>
			<Id>13315</Id>
			<Message LcId="1033">A module fault happened in group {0}</Message>
		</Event>
		<Event>
			<Id>13316</Id>
			<Message LcId="1033">The assigned connection reported an error when the group {0} was deactivated in passivate mode</Message>
		</Event>
		<Event>
			<Id>13317</Id>
			<Message LcId="1033">The connection has been successfully restarted when the group {0} was deactivated in passivate mode</Message>
		</Event>
		<Event>
			<Id>13328</Id>
			<Message LcId="1033">All groups will enter the ERROR-state because the safe logic program has been restarted</Message>
		</Event>
		<Event>
			<Id>13329</Id>
			<Message LcId="1033">All groups will enter the ERROR-state because the CRC of the Change Group Activation Data was wrong</Message>
		</Event>
		<Event>
			<Id>13330</Id>
			<Message LcId="1033">All groups will enter the ERROR-state because the CRC of the Change FB Parameter Data was wrong</Message>
		</Event>
		<Event>
			<Id>13331</Id>
			<Message LcId="1033">All groups will enter the ERROR-state because the CRC of the Project CRC Data was wrong</Message>
		</Event>
		<Event>
			<Id>13332</Id>
			<Message LcId="1033">All groups will enter the ERROR-state because the CRC of the Cyclic FRAM Data was wrong</Message>
		</Event>
		<Event>
			<Id>13333</Id>
			<Message LcId="1033">The TwinSAFE Logic Program was not loaded on C1 because of an inconsistency</Message>
		</Event>
		<Event>
			<Id>13334</Id>
			<Message LcId="1033">The TwinSAFE Logic Program was not loaded on C2 because of an inconsistency</Message>
		</Event>
		<Event>
			<Id>13335</Id>
			<Message LcId="1033">All groups will enter the ERROR-state because the initialization of Cyclic FRAM Data was wrong</Message>
		</Event>
		<Event>
			<Id>13336</Id>
			<Message LcId="1033">Safe User Parameter from FRAM are not correct</Message>
		</Event>
		<Event>
			<Id>13344</Id>
			<Message LcId="1033">No more EtherCAT size error (EtherCAT Output Size={0}, EtherCAT Input Size={1})</Message>
		</Event>
		<Event>
			<Id>13345</Id>
			<Message LcId="1033">The EtherCAT Output Data sizes of the Safety Logic Program ({0}) and the EtherCAT Configuration ({1}) are unequal</Message>
		</Event>
		<Event>
			<Id>13346</Id>
			<Message LcId="1033">The EtherCAT Input Data sizes of the Safety Logic Program ({0}) and the EtherCAT Configuration ({1}) are unequal</Message>
		</Event>
		<Event>
			<Id>13347</Id>
			<Message LcId="1033">The EtherCAT Output Data sizes for PROFIsafe of the Safety Logic Program ({0}) and the EtherCAT Configuration ({1}) are unequal</Message>
		</Event>
		<Event>
			<Id>13348</Id>
			<Message LcId="1033">The EtherCAT Input Data sizes for PROFIsafe of the Safety Logic Program ({0}) and the EtherCAT Configuration ({1}) are unequal</Message>
		</Event>
		<Event>
			<Id>13349</Id>
			<Message LcId="1033">The needed EtherCAT Process data buffer size ({0}) exceeded the maximum available size of {1}</Message>
		</Event>
		<Event>
			<Id>13569</Id>
			<Message LcId="1033">On the {0}. connection the changeable FSoE Address of {1} already exists</Message>
		</Event>
		<Event>
			<Id>13570</Id>
			<Message LcId="1033">On the {0}. connection the changeable FSoE Address is zero</Message>
		</Event>
		<Event>
			<Id>14336</Id>
			<Message LcId="1033">FB {0} (ESTOP): An EDM-fault (0x{1,x}) was detected in state SAFE</Message>
		</Event>
		<Event>
			<Id>14338</Id>
			<Message LcId="1033">FB {0} (ESTOP): An EDM-fault (0x{1,x}) was detected in state RESET</Message>
		</Event>
		<Event>
			<Id>14339</Id>
			<Message LcId="1033">FB {0} (ESTOP): An EDM-fault (0x{1,x}) was detected in state START</Message>
		</Event>
		<Event>
			<Id>14340</Id>
			<Message LcId="1033">FB {0} (ESTOP): An DiscTime-Fault (0x{1,x}) was detected in state SAFE, the actual EStopIn-values are 0x{2,x}</Message>
		</Event>
		<Event>
			<Id>14342</Id>
			<Message LcId="1033">FB {0} (ESTOP): An DiscTime-Fault (0x{1,x}) was detected in state RESET, the actual EStopIn-values are 0x{2,x}</Message>
		</Event>
		<Event>
			<Id>14343</Id>
			<Message LcId="1033">FB {0} (ESTOP): An DiscTime-Fault (0x{1,x}) was detected in state START, the actual EStopIn-values are 0x{2,x}</Message>
		</Event>
		<Event>
			<Id>14345</Id>
			<Message LcId="1033">FB {0} (ESTOP): An DiscTime-Fault (0x{1,x}) was detected in state DELAYOUT, the actual EStopIn-values are 0x{2,x}</Message>
		</Event>
		<Event>
			<Id>14351</Id>
			<Message LcId="1033">FB {0} (ESTOP): At least one activated EDM-Input was not reset in RUN when the EDM Reset time had been expired (Diag-Code=0x{1,x})</Message>
		</Event>
		<Event>
			<Id>14352</Id>
			<Message LcId="1033">FB {0} (MON): An EDM-fault (0x{1,x}) was detected in state SAFE</Message>
		</Event>
		<Event>
			<Id>14354</Id>
			<Message LcId="1033">FB {0} (MON): An EDM-fault (0x{1,x}) was detected in state RESET</Message>
		</Event>
		<Event>
			<Id>14355</Id>
			<Message LcId="1033">FB {0} (MON): An EDM-fault (0x{1,x}) was detected in state START</Message>
		</Event>
		<Event>
			<Id>14356</Id>
			<Message LcId="1033">FB {0} (MON): An DiscTime-Fault (0x{1,x}) was detected in state SAFE, the actual MonIn/Secure-values are 0x{2,x}</Message>
		</Event>
		<Event>
			<Id>14358</Id>
			<Message LcId="1033">FB {0} (MON): An DiscTime-Fault (0x{1,x}) was detected in state RESET, the actual MonIn/Secure-values are 0x{2,x}</Message>
		</Event>
		<Event>
			<Id>14359</Id>
			<Message LcId="1033">FB {0} (MON): An DiscTime-Fault (0x{1,x}) was detected in state START, the actual MonIn/Secure-values are 0x{2,x}</Message>
		</Event>
		<Event>
			<Id>14360</Id>
			<Message LcId="1033">FB {0} (MON): An DiscTime-Fault (0x{1,x}) was detected in state RUN, the actual MonIn/Secure-values are 0x{2,x}</Message>
		</Event>
		<Event>
			<Id>14361</Id>
			<Message LcId="1033">FB {0} (MON): An DiscTime-Fault (0x{1,x}) was detected in state DELAYOUT, the actual MonIn/Secure-values are 0x{2,x}</Message>
		</Event>
		<Event>
			<Id>14362</Id>
			<Message LcId="1033">FB {0} (MON): An DiscTime-Fault (0x{1,x}) was detected in state FUNCTEST, the actual MonIn/Secure-values are 0x{2,x}</Message>
		</Event>
		<Event>
			<Id>14367</Id>
			<Message LcId="1033">FB {0} (MON): At least one activated EDM-Input was not reset in RUN when the EDM Reset time had been expired (Diag-Code=0x{1,x})</Message>
		</Event>
		<Event>
			<Id>14368</Id>
			<Message LcId="1033">FB {0} (TWOHAND): A Disc-Group-fault (0x{1,x}) was detected in state 1BUTTON, the actual TwoHandIn-values are 0x{2,x}</Message>
		</Event>
		<Event>
			<Id>14369</Id>
			<Message LcId="1033">FB {0} (TWOHAND): A Disc-Group-fault (0x{1,x}) was detected in state 2BUTTON, the actual TwoHandIn-values are 0x{2,x}</Message>
		</Event>
		<Event>
			<Id>14371</Id>
			<Message LcId="1033">FB {0} (TWOHAND): An DiscTime-Fault (0x{1,x}) was detected in state SAFE, the actual TwoHandIn-values are 0x{2,x}</Message>
		</Event>
		<Event>
			<Id>14373</Id>
			<Message LcId="1033">FB {0} (TWOHAND): An DiscTime-Fault (0x{1,x}) was detected in state RESET, the actual TwoHandIn-values are 0x{2,x}</Message>
		</Event>
		<Event>
			<Id>14379</Id>
			<Message LcId="1033">FB {0} (TWOHAND): An DiscTime-Fault (0x{1,x}) was detected in state 1BUTTON, the actual TwoHandIn-values are 0x{2,x}</Message>
		</Event>
		<Event>
			<Id>14380</Id>
			<Message LcId="1033">FB {0} (TWOHAND): An DiscTime-Fault (0x{1,x}) was detected in state 2BUTTON, the actual TwoHandIn-values are 0x{2,x}</Message>
		</Event>
		<Event>
			<Id>14381</Id>
			<Message LcId="1033">FB {0} (TWOHAND): An DiscTime-Fault (0x{1,x}) was detected in state RELEASE, the actual TwoHandIn-values are 0x{2,x}</Message>
		</Event>
		<Event>
			<Id>14384</Id>
			<Message LcId="1033">FB {0} (OPMODE): An DiscTime-Fault (0x{1,x}) was detected, the actual OpIn-values are 0x{2,x}</Message>
		</Event>
		<Event>
			<Id>14385</Id>
			<Message LcId="1033">FB {0} (OPMODE): An Input-Fault was detected in state RESET, the actual OpIn-values are 0x{1,x}</Message>
		</Event>
		<Event>
			<Id>14400</Id>
			<Message LcId="1033">FB {0} (EDM): The SwitchOn-Time had been expired</Message>
		</Event>
		<Event>
			<Id>14401</Id>
			<Message LcId="1033">FB {0} (EDM): The SwitchOff-Time had been expired</Message>
		</Event>
		<Event>
			<Id>14419</Id>
			<Message LcId="1033">FB {0} (CS): An DiscTime-Fault (0x{1,x}) was detected in state SAFE, the actual Deactivate-values are 0x{2,x}</Message>
		</Event>
		<Event>
			<Id>14421</Id>
			<Message LcId="1033">FB {0} (CS): An DiscTime-Fault (0x{1,x}) was detected in state RESET, the actual Deactivate-values are 0x{2,x}</Message>
		</Event>
		<Event>
			<Id>14465</Id>
			<Message LcId="1033">FB {0} (MUTING): An DiscTime-Fault (0x{1,x}) was detected in state RUN, the actual MuteIn/OssdIn-values are 0x{2,x}</Message>
		</Event>
		<Event>
			<Id>14467</Id>
			<Message LcId="1033">FB {0} (MUTING): An DiscTime-Fault (0x{1,x}) was detected in state SAFE, the actual MuteIn/OssdIn-values are 0x{2,x}</Message>
		</Event>
		<Event>
			<Id>14469</Id>
			<Message LcId="1033">FB {0} (MUTING): An DiscTime-Fault (0x{1,x}) was detected in state RESET, the actual MuteIn/OssdIn-values are 0x{2,x}</Message>
		</Event>
		<Event>
			<Id>14472</Id>
			<Message LcId="1033">FB {0} (MUTING): An DiscTime-Fault (0x{1,x}) was detected in state DELAYOUT, the actual MuteIn/OssdIn-values are 0x{2,x}</Message>
		</Event>
		<Event>
			<Id>14473</Id>
			<Message LcId="1033">FB {0} (MUTING): An DiscTime-Fault (0x{1,x}) was detected in state MUTING1, the actual MuteIn/OssdIn-values are 0x{2,x}</Message>
		</Event>
		<Event>
			<Id>14474</Id>
			<Message LcId="1033">FB {0} (MUTING): An DiscTime-Fault (0x{1,x}) was detected in state MUTING2, the actual MuteIn/OssdIn-values are 0x{2,x}</Message>
		</Event>
		<Event>
			<Id>14475</Id>
			<Message LcId="1033">FB {0} (MUTING): An DiscTime-Fault (0x{1,x}) was detected in state MUTING3, the actual MuteIn/OssdIn-values are 0x{2,x}</Message>
		</Event>
		<Event>
			<Id>14476</Id>
			<Message LcId="1033">FB {0} (MUTING): An DiscTime-Fault (0x{1,x}) was detected in state MUTING4, the actual MuteIn/OssdIn-values are 0x{2,x}</Message>
		</Event>
		<Event>
			<Id>14477</Id>
			<Message LcId="1033">FB {0} (MUTING): An DiscTime-Fault (0x{1,x}) was detected in state MUTING5, the actual MuteIn/OssdIn-values are 0x{2,x}</Message>
		</Event>
		<Event>
			<Id>14478</Id>
			<Message LcId="1033">FB {0} (MUTING): An DiscTime-Fault (0x{1,x}) was detected in state MUTING6, the actual MuteIn/OssdIn-values are 0x{2,x}</Message>
		</Event>
		<Event>
			<Id>14479</Id>
			<Message LcId="1033">FB {0} (MUTING): An DiscTime-Fault (0x{1,x}) was detected in state MUTING7, the actual MuteIn/OssdIn-values are 0x{2,x}</Message>
		</Event>
		<Event>
			<Id>14480</Id>
			<Message LcId="1033">FB {0} (MUTING): An DiscTime-Fault (0x{1,x}) was detected in state MUTING8, the actual MuteIn/OssdIn-values are 0x{2,x}</Message>
		</Event>
		<Event>
			<Id>14481</Id>
			<Message LcId="1033">FB {0} (MUTING): An DiscTime-Fault (0x{1,x}) was detected in state MUTING9, the actual MuteIn/OssdIn-values are 0x{2,x}</Message>
		</Event>
		<Event>
			<Id>14482</Id>
			<Message LcId="1033">FB {0} (MUTING): State RUN, Sequential Inputs=TRUE: MutingEnable is set and the MuteIn-signals are invalid, the actual MuteIn/OssdIn-values are 0x{1,x}</Message>
		</Event>
		<Event>
			<Id>14483</Id>
			<Message LcId="1033">FB {0} (MUTING): State RUN, Sequential Inputs=FALSE: MutingEnable is set and the MuteIn-signals are invalid, the actual MuteIn/OssdIn-values are 0x{1,x}</Message>
		</Event>
		<Event>
			<Id>14484</Id>
			<Message LcId="1033">FB {0} (MUTING): State MUTING1, MutingEnable is set and the OssdIn-signals are invalid, the actual MuteIn/OssdIn-values are 0x{1,x}</Message>
		</Event>
		<Event>
			<Id>14485</Id>
			<Message LcId="1033">FB {0} (MUTING): State MUTING1, MutingEnable is set and the MuteIn-signals are invalid, the actual MuteIn/OssdIn-values are 0x{1,x}</Message>
		</Event>
		<Event>
			<Id>14486</Id>
			<Message LcId="1033">FB {0} (MUTING): State MUTING2, MutingEnable is set and the MuteIn-signals before the AOPD are invalid, the actual MuteIn/OssdIn-values are 0x{1,x}</Message>
		</Event>
		<Event>
			<Id>14487</Id>
			<Message LcId="1033">FB {0} (MUTING): State MUTING2, MutingEnable is set and the MuteIn-signals after the AOPD are invalid, the actual MuteIn/OssdIn-values are 0x{1,x}</Message>
		</Event>
		<Event>
			<Id>14488</Id>
			<Message LcId="1033">FB {0} (MUTING): State MUTING3, MutingEnable is set and the OssdIn-signals are invalid, the actual MuteIn/OssdIn-values are 0x{1,x}</Message>
		</Event>
		<Event>
			<Id>14489</Id>
			<Message LcId="1033">FB {0} (MUTING): State MUTING3, Sequential Inputs=TRUE: MutingEnable is set and the MuteIn-signals are invalid, the actual MuteIn/OssdIn-values are 0x{1,x}</Message>
		</Event>
		<Event>
			<Id>14490</Id>
			<Message LcId="1033">FB {0} (MUTING): State MUTING3, Sequential Inputs=FALSE: MutingEnable is set and the MuteIn-signals are invalid, the actual MuteIn/OssdIn-values are 0x{1,x}</Message>
		</Event>
		<Event>
			<Id>14491</Id>
			<Message LcId="1033">FB {0} (MUTING): State MUTING4, MutingEnable is set and the OssdIn-signals are invalid, the actual MuteIn/OssdIn-values are 0x{1,x}</Message>
		</Event>
		<Event>
			<Id>14492</Id>
			<Message LcId="1033">FB {0} (MUTING): State MUTING4, MutingEnable is set and the MuteIn-signals are invalid, the actual MuteIn/OssdIn-values are 0x{1,x}</Message>
		</Event>
		<Event>
			<Id>14493</Id>
			<Message LcId="1033">FB {0} (MUTING): State MUTING5, MutingEnable is set and the OssdIn-signals are invalid, the actual MuteIn/OssdIn-values are 0x{1,x}</Message>
		</Event>
		<Event>
			<Id>14494</Id>
			<Message LcId="1033">FB {0} (MUTING): State MUTING5, Sequential Inputs=TRUE: MutingEnable is set and the MuteIn-signals are invalid, the actual MuteIn/OssdIn-values are 0x{1,x}</Message>
		</Event>
		<Event>
			<Id>14495</Id>
			<Message LcId="1033">FB {0} (MUTING): State MUTING5, Sequential Inputs=FALSE: MutingEnable is set and the MuteIn-signals are invalid, the actual MuteIn/OssdIn-values are 0x{1,x}</Message>
		</Event>
		<Event>
			<Id>14496</Id>
			<Message LcId="1033">FB {0} (MUTING): State MUTING6, MutingEnable is set and the OssdIn-signals are invalid, the actual MuteIn/OssdIn-values are 0x{1,x}</Message>
		</Event>
		<Event>
			<Id>14497</Id>
			<Message LcId="1033">FB {0} (MUTING): State MUTING6, MutingEnable is set and the MuteIn-signals are invalid, the actual MuteIn/OssdIn-values are 0x{1,x}</Message>
		</Event>
		<Event>
			<Id>14498</Id>
			<Message LcId="1033">FB {0} (MUTING): State MUTING7, MutingEnable is set and the MuteIn-signals before the AOPD are invalid, the actual MuteIn/OssdIn-values are 0x{1,x}</Message>
		</Event>
		<Event>
			<Id>14499</Id>
			<Message LcId="1033">FB {0} (MUTING): State MUTING7, MutingEnable is set and the MuteIn-signals after the AOPD are invalid, the actual MuteIn/OssdIn-values are 0x{1,x}</Message>
		</Event>
		<Event>
			<Id>14500</Id>
			<Message LcId="1033">FB {0} (MUTING): State MUTING8, MutingEnable is set and the OssdIn-signals are invalid, the actual MuteIn/OssdIn-values are 0x{1,x}</Message>
		</Event>
		<Event>
			<Id>14501</Id>
			<Message LcId="1033">FB {0} (MUTING): State MUTING8, Sequential Inputs=TRUE, CheckOssdOptional=TRUE: MutingEnable is set and the OssdIn-signals are invalid, the actual MuteIn/OssdIn-values are 0x{1,x}</Message>
		</Event>
		<Event>
			<Id>14502</Id>
			<Message LcId="1033">FB {0} (MUTING): State MUTING8, Sequential Inputs=TRUE: MutingEnable is set and the MuteIn-signals are invalid, the actual MuteIn/OssdIn-values are 0x{1,x}</Message>
		</Event>
		<Event>
			<Id>14503</Id>
			<Message LcId="1033">FB {0} (MUTING): State MUTING8, Sequential Inputs=FALSE: MutingEnable is set and the MuteIn-signals are invalid, the actual MuteIn/OssdIn-values are 0x{1,x}</Message>
		</Event>
		<Event>
			<Id>14504</Id>
			<Message LcId="1033">FB {0} (MUTING): State MUTING9, MutingEnable is set and the OssdIn-signals are invalid, the actual MuteIn/OssdIn-values are 0x{1,x}</Message>
		</Event>
		<Event>
			<Id>14505</Id>
			<Message LcId="1033">FB {0} (MUTING): State MUTING9, MutingEnable is set and the MuteIn-signals are invalid, the actual MuteIn/OssdIn-values are 0x{1,x}</Message>
		</Event>
		<Event>
			<Id>14506</Id>
			<Message LcId="1033">FB {0} (MUTING): State MUTING5, Sequential Inputs=TRUE, MuteIn3 and MuteIn4 are inactive: MutingEnable is set and the MuteIn-signals are invalid, the actual MuteIn/OssdIn-values are 0x{1,x}</Message>
		</Event>
		<Event>
			<Id>14507</Id>
			<Message LcId="1033">FB {0} (MUTING): State MUTING6, Sequential Inputs=TRUE, MuteIn3 and MuteIn4 are inactive: MutingEnable is set and the MuteIn-signals are invalid, the actual MuteIn/OssdIn-values are 0x{1,x}</Message>
		</Event>
		<Event>
			<Id>14508</Id>
			<Message LcId="1033">FB {0} (MUTING): State MUTING1, MutingEnable is set and the MuteIn-signals are invalid, the actual MuteIn/OssdIn-values are 0x{1,x}</Message>
		</Event>
		<Event>
			<Id>14512</Id>
			<Message LcId="1033">FB {0} (MUTING): At least one activated EDM-Input was not reset in RUN when the EDM Reset time had been expired (Diag-Code=0x{1,x})</Message>
		</Event>
		<Event>
			<Id>14529</Id>
			<Message LcId="1033">FB {0} (MUTING): The Max-Muting-Time had been expired in state MUTING1 (Digital Inputs=0x{1,x})</Message>
		</Event>
		<Event>
			<Id>14530</Id>
			<Message LcId="1033">FB {0} (MUTING): The Max-Muting-Time had been expired in state MUTING2 (Digital Inputs=0x{1,x})</Message>
		</Event>
		<Event>
			<Id>14531</Id>
			<Message LcId="1033">FB {0} (MUTING): The Max-Muting-Time had been expired in state MUTING3 (Digital Inputs=0x{1,x})</Message>
		</Event>
		<Event>
			<Id>14532</Id>
			<Message LcId="1033">FB {0} (MUTING): The Max-Muting-Time had been expired in state MUTING4 (Digital Inputs=0x{1,x})</Message>
		</Event>
		<Event>
			<Id>14533</Id>
			<Message LcId="1033">FB {0} (MUTING): The Max-Muting-Time had been expired in state MUTING5 (Digital Inputs=0x{1,x})</Message>
		</Event>
		<Event>
			<Id>14534</Id>
			<Message LcId="1033">FB {0} (MUTING): The Max-Muting-Time had been expired in state MUTING6 (Digital Inputs=0x{1,x})</Message>
		</Event>
		<Event>
			<Id>14535</Id>
			<Message LcId="1033">FB {0} (MUTING): The Max-Muting-Time had been expired in state MUTING7 (Digital Inputs=0x{1,x})</Message>
		</Event>
		<Event>
			<Id>14536</Id>
			<Message LcId="1033">FB {0} (MUTING): The Max-Muting-Time had been expired in state MUTING8 (Digital Inputs=0x{1,x})</Message>
		</Event>
		<Event>
			<Id>14537</Id>
			<Message LcId="1033">FB {0} (MUTING): The Max-Muting-Time had been expired in state MUTING9 (Digital Inputs=0x{1,x})</Message>
		</Event>
		<Event>
			<Id>16385</Id>
			<Message LcId="1033">FB {0} (CAMMON): The TDC2UpperLimit ({1}) is lower or equal than the maximum position jitter ({2})</Message>
		</Event>
		<Event>
			<Id>16386</Id>
			<Message LcId="1033">FB {0} (CAMMON): The Position ({1}) is bigger than the maximum position (plus the maximum position jitter) ({2})</Message>
		</Event>
		<Event>
			<Id>16387</Id>
			<Message LcId="1033">FB {0} (CAMMON): The input OverrunCAM was FALSE in the top dead center area, the actual position is {1}</Message>
		</Event>
		<Event>
			<Id>16388</Id>
			<Message LcId="1033">FB {0} (CAMMON): The input OverrunCAM changed from FALSE to TRUE outside the area between BDCUpperLimit and TDCLowerLimit, the actual position is {1}</Message>
		</Event>
		<Event>
			<Id>16389</Id>
			<Message LcId="1033">FB {0} (CAMMON): The input OverrunCAM was TRUE in the area between OverrunMax and BDCUpperLimit, the actual position is {1}</Message>
		</Event>
		<Event>
			<Id>16390</Id>
			<Message LcId="1033">FB {0} (CAMMON): The input OverrunCAM changed from TRUE to FALSE outside the area between OverrunMax and BDCLowerLimit, the actual position is {1}</Message>
		</Event>
		<Event>
			<Id>16391</Id>
			<Message LcId="1033">FB {0} (CAMMON): The input UpwardsCAM was FALSE in the area between BDCUpperLimit and TDCLowerLimit, the actual position is {1}</Message>
		</Event>
		<Event>
			<Id>16392</Id>
			<Message LcId="1033">FB {0} (CAMMON): The input UpwardsCAM changed from FALSE to TRUE outside the area between BDCLowerLimit and TDCLowerLimit, the actual position is {1}</Message>
		</Event>
		<Event>
			<Id>16393</Id>
			<Message LcId="1033">FB {0} (CAMMON): The input UpwardsCAM changed from TRUE to FALSE outside the area between TDCLowerLimit and OverrunMax, the actual position is {1}</Message>
		</Event>
		<Event>
			<Id>16394</Id>
			<Message LcId="1033">FB {0} (CAMMON): The Position was moving while waiting for a rising edge of the input Reset in the state MOVE-STOP</Message>
		</Event>
		<Event>
			<Id>16395</Id>
			<Message LcId="1033">FB {0} (CAMMON): The Position was moving while waiting for a falling edge of the input Reset in the state MOVE-START</Message>
		</Event>
		<Event>
			<Id>16396</Id>
			<Message LcId="1033">FB {0} (CAMMON): The Position {1} in the area between OverrunMax and BDCLowerLimit was detected in the state MOVE-UP</Message>
		</Event>
		<Event>
			<Id>16397</Id>
			<Message LcId="1033">FB {0} (CAMMON): The Position has left the top dead center while waiting for a stop, the actual position is {1}</Message>
		</Event>
		<Event>
			<Id>16398</Id>
			<Message LcId="1033">FB {0} (CAMMON): The Position has been changed negative</Message>
		</Event>
		<Event>
			<Id>16399</Id>
			<Message LcId="1033">FB {0} (CAMMON): The input UpwardsCAM was TRUE in the area between OverrunMax and BDCLowerLimit</Message>
		</Event>
		<Event>
			<Id>16400</Id>
			<Message LcId="1033">FB {0} (CAMMON): The Position has a circle overflow in Pendulum Mode, actual position={1}, last position={2}</Message>
		</Event>
		<Event>
			<Id>16401</Id>
			<Message LcId="1033">FB {0} (CAMMON): The Position has moved while waiting for a rising edge of the input Reset in Pendulum Mode, actual position={1}, compare position={2}</Message>
		</Event>
		<Event>
			<Id>16402</Id>
			<Message LcId="1033">FB {0} (CAMMON): The Input BackwardsMove is TRUE while the Position is between 180° and 360°, the actual position is {1}</Message>
		</Event>
		<Event>
			<Id>16403</Id>
			<Message LcId="1033">FB {0} (CAMMON): The Input BackwardsMove is TRUE while the moving is clockwise</Message>
		</Event>
		<Event>
			<Id>16404</Id>
			<Message LcId="1033">FB {0} (CAMMON): The Position has moved while waiting for a falling edge of the input Reset in Pendulum Mode, actual position={1}, last position={2}</Message>
		</Event>
		<Event>
			<Id>16405</Id>
			<Message LcId="1033">FB {0} (CAMMON): The value of TDCLowerLimit (plus maximum position jitter) ({1}) is bigger or equal the configured position of 360° ({2})</Message>
		</Event>
		<Event>
			<Id>16406</Id>
			<Message LcId="1033">FB {0} (CAMMON): The value of BDCUpperLimit (plus twice the maximum position jitter) ({1}) is bigger or equal the value of TDCLowerLimit ({2})</Message>
		</Event>
		<Event>
			<Id>16407</Id>
			<Message LcId="1033">FB {0} (CAMMON): The value of BDCUpperLimit ({1}) is smaller or equal the configured value of 180° (plus maximum position jitter) ({2})</Message>
		</Event>
		<Event>
			<Id>16408</Id>
			<Message LcId="1033">FB {0} (CAMMON): The value of BDCLowerLimit (plus maximum position jitter) ({1}) is greater or equal the configured value of 180° ({2})</Message>
		</Event>
		<Event>
			<Id>16409</Id>
			<Message LcId="1033">FB {0} (CAMMON): The value of OverrunMax (plus twice the maximum position jitter) ({1}) is bigger or equal the value of BDCLowerLimit ({2})</Message>
		</Event>
		<Event>
			<Id>16410</Id>
			<Message LcId="1033">FB {0} (CAMMON): The value of TDCUpperLimit (plus twice the maximum position jitter) ({1}) is bigger or equal the value of OverrunMax ({2})</Message>
		</Event>
		<Event>
			<Id>16411</Id>
			<Message LcId="1033">FB {0} (CAMMON): The value of TDC1UpperLimit (plus the maximum position jitter) ({1}) is bigger or equal the configured position of 360° ({2})</Message>
		</Event>
		<Event>
			<Id>16412</Id>
			<Message LcId="1033">FB {0} (CAMMON): The value of TDC1LowerLimit (plus twice the maximum position jitter) ({1}) is bigger or equal the value of TDC1UpperLimit (5d)</Message>
		</Event>
		<Event>
			<Id>16413</Id>
			<Message LcId="1033">FB {0} (CAMMON): The value of TDC2LowerLimit (plus twice the maximum position jitter) ({1}) is bigger or equal the value of BDCLowerLimit ({2})</Message>
		</Event>
		<Event>
			<Id>16414</Id>
			<Message LcId="1033">FB {0} (CAMMON): The value of TDC2UpperLimit (plus twice the maximum position jitter) ({1}) is bigger or equal the value of TDC2LowerLimit ({2})</Message>
		</Event>
		<Event>
			<Id>16415</Id>
			<Message LcId="1033">FB {0} (CAMMON): The input PressStarted is TRUE and the position did not move after the PressStartedDelayTime</Message>
		</Event>
		<Event>
			<Id>16416</Id>
			<Message LcId="1033">FB {0} (CAMMON): The input PressStarted is TRUE and the position has stopped after moving before</Message>
		</Event>
		<Event>
			<Id>16417</Id>
			<Message LcId="1033">FB {0} (CAMMON): The input PressStarted is TRUE and the position has not moved enough, the actual position is {1}, the compare position is {2}</Message>
		</Event>
		<Event>
			<Id>16418</Id>
			<Message LcId="1033">FB {0} (CAMMON), Pendulum Mode: The Position has changed contra clockwise while moving up clockwise (actual Position={1}, old Position={2})</Message>
		</Event>
		<Event>
			<Id>16419</Id>
			<Message LcId="1033">FB {0} (CAMMON), Pendulum Mode: The Position has changed clockwise while moving up contra clockwise (actual Position={1}, old Position={2})</Message>
		</Event>
		<Event>
			<Id>16420</Id>
			<Message LcId="1033">FB {0} (CAMMON): The Position was moving while waiting for a falling edge of the input Reset in the state WAIT-FOR_RESET</Message>
		</Event>
		<Event>
			<Id>16421</Id>
			<Message LcId="1033">FB {0} (CAMMON): The TDCUpperLimit ({1}) is lower or equal than the maximum position jitter ({2})</Message>
		</Event>
		<Event>
			<Id>16512</Id>
			<Message LcId="1033">FB {0} (ADD/SUB): an underflow was detected, AnalogIn1={1}, AnalogIn2={2}</Message>
		</Event>
		<Event>
			<Id>16513</Id>
			<Message LcId="1033">FB {0} (ADD/SUB): an overflow was detected, AnalogIn1={1}, AnalogIn2={2}</Message>
		</Event>
		<Event>
			<Id>16520</Id>
			<Message LcId="1033">FB {0} (SPEED): an underflow was detected, actual Position={1}, old Position={2}</Message>
		</Event>
		<Event>
			<Id>16521</Id>
			<Message LcId="1033">FB {0} (SPEED): an overflow was detected, actual Position={1}, old Position={2}</Message>
		</Event>
		<Event>
			<Id>16528</Id>
			<Message LcId="1033">FB {0} (LIMIT): the minimum value ({1}) is bigger than the maximum value ({2})</Message>
		</Event>
		<Event>
			<Id>16536</Id>
			<Message LcId="1033">FB {0} (COMPARE): an underflow was detected on CompOut ({1}), the minimum allowed value is {2}</Message>
		</Event>
		<Event>
			<Id>16537</Id>
			<Message LcId="1033">FB {0} (COMPARE): an overflow was detected on CompOut ({1}), the maximum allowed value is {2}</Message>
		</Event>
		<Event>
			<Id>16544</Id>
			<Message LcId="1033">FB {0} (MUL): an underflow was detected, AnalogIn1={1}, AnalogIn2={2}</Message>
		</Event>
		<Event>
			<Id>16545</Id>
			<Message LcId="1033">FB {0} (MUL): an overflow was detected, AnalogIn1={1}, AnalogIn2={2}</Message>
		</Event>
		<Event>
			<Id>16552</Id>
			<Message LcId="1033">FB {0} (DIV): an underflow was detected, AnalogIn1={1}, AnalogIn2={2}</Message>
		</Event>
		<Event>
			<Id>16553</Id>
			<Message LcId="1033">FB {0} (DIV): an overflow was detected, AnalogIn1={1}, AnalogIn2={2}</Message>
		</Event>
		<Event>
			<Id>16560</Id>
			<Message LcId="1033">FB {0} (SCALE): an underflow was detected, AnalogIn={1}</Message>
		</Event>
		<Event>
			<Id>16561</Id>
			<Message LcId="1033">FB {0} (SCALE): an overflow was detected, AnalogIn={1}</Message>
		</Event>
		<Event>
			<Id>16562</Id>
			<Message LcId="1033">FB {0} (SCALE): an overflow was detected after multiplication, AnalogIn={1}</Message>
		</Event>
		<Event>
			<Id>16563</Id>
			<Message LcId="1033">FB {0} (SCALE): an overflow was detected before division when rounding up the value, AnalogIn={1}</Message>
		</Event>
		<Event>
			<Id>16568</Id>
			<Message LcId="1033">FB {0} (COUNT): an underflow was detected on ActValue ({1})</Message>
		</Event>
		<Event>
			<Id>16569</Id>
			<Message LcId="1033">FB {0} (COUNT): an overflow was detected on ActValue ({1})</Message>
		</Event>
		<Event>
			<Id>16576</Id>
			<Message LcId="1033">FB {0} (SLI): an underflow was detected on ActValue ({1}), the minimum allowed value is {2}</Message>
		</Event>
		<Event>
			<Id>16577</Id>
			<Message LcId="1033">FB {0} (SLI): an overflow was detected on ActValue ({1}), the maximum allowed value is {2}</Message>
		</Event>
		<Event>
			<Id>16584</Id>
			<Message LcId="1033">FB {0} (ENVELOPE): an underflow was detected on InValue ({1}), the minimum allowed value is {2}</Message>
		</Event>
		<Event>
			<Id>16585</Id>
			<Message LcId="1033">FB {0} (ENVELOPE): an overflow was detected on InValue ({1}), the maximum allowed value is {2}</Message>
		</Event>
		<Event>
			<Id>16586</Id>
			<Message LcId="1033">FB {0} (ENVELOPE): an overflow error was detected on InValue ({1}), InValue+Offset is bigger than the maximum allowed value</Message>
		</Event>
		<Event>
			<Id>16587</Id>
			<Message LcId="1033">FB {0} (ENVELOPE): the MaxTime was expired (InValue={1})</Message>
		</Event>
		<Event>
			<Id>16592</Id>
			<Message LcId="1033">FB {0} (SLP): MultiturnPos_LL ({1}) is bigger than MultiturnPos_UL ({2})</Message>
		</Event>
		<Event>
			<Id>16593</Id>
			<Message LcId="1033">FB {0} (SLP): MultiturnPos_LL=MultiturnPos_UL and SingleturnPos_LL ({1}) is bigger than SingleturnPos_UL ({2})</Message>
		</Event>
		<Event>
			<Id>16600</Id>
			<Message LcId="1033">FB {0} (SBT): Brake-Test failed in state {1}</Message>
		</Event>
		<Event>
			<Id>16601</Id>
			<Message LcId="1033">FB {0} (SBT): Brake-Test Interval expired in state {1}</Message>
		</Event>
		<Event>
			<Id>16602</Id>
			<Message LcId="1033">FB {0} (SBT): Brake-Test failed, Actual Position Deviation={1}, Maximum Position Deviation={2}Interval expired in state {3}</Message>
		</Event>
		<Event>
			<Id>24585</Id>
			<Message LcId="1033">SAFEOUT:Initial-Parameter: MultiplierDiagTestPulse has to be greater zero. ModuleNr:0x{0,x}</Message>
		</Event>
		<Event>
			<Id>24592</Id>
			<Message LcId="1033">SAFEOUT:Initial-Parameter: Number of Modules incorrect. ModuleNr:0x{0,x}, Parameter:0x{1,x}</Message>
		</Event>
		<Event>
			<Id>24593</Id>
			<Message LcId="1033">SAFEOUT:Initial-Parameter: Number of Channels incorrect. Parameter0:0x{0,x}, Parameter1:0x{1,x}, Parameter2:0x{2,x}</Message>
		</Event>
		<Event>
			<Id>24594</Id>
			<Message LcId="1033">SAFEOUT:Initial-Parameter: Number of Diagnosis active Module incorrect. Parameter0:0x{0,x}, Parameter1:0x{1,x}, Parameter2:0x{2,x}</Message>
		</Event>
		<Event>
			<Id>24595</Id>
			<Message LcId="1033">SAFEOUT:Initial-Parameter: Number of Diagnosis inactive Module incorrect. Parameter0:0x{0,x}, Parameter1:0x{1,x}, Parameter2:0x{2,x}</Message>
		</Event>
		<Event>
			<Id>24596</Id>
			<Message LcId="1033">SAFEOUT:Initial-Parameter: Number of Feedback active Module incorrect. Parameter0:0x{0,x}, Parameter1:0x{1,x}, Parameter2:0x{2,x}</Message>
		</Event>
		<Event>
			<Id>24597</Id>
			<Message LcId="1033">SAFEOUT:Initial-Parameter: Number of Feedback Diagnosis active Module incorrect. Parameter0:0x{0,x}, Parameter1:0x{1,x}, Parameter2:0x{2,x}</Message>
		</Event>
		<Event>
			<Id>24598</Id>
			<Message LcId="1033">SAFEOUT:Initial-Parameter: Number of Feedback inactive Module incorrect. Parameter0:0x{0,x}, Parameter1:0x{1,x}, Parameter2:0x{2,x}</Message>
		</Event>
		<Event>
			<Id>24599</Id>
			<Message LcId="1033">SAFEOUT:Initial-Parameter: Number of Feedback Diagnosis inactive Module incorrect. Parameter0:0x{0,x}, Parameter1:0x{1,x}, Parameter2:0x{2,x}</Message>
		</Event>
		<Event>
			<Id>24600</Id>
			<Message LcId="1033">SAFEOUT:Initial-Parameter: Number of Diagnosis active Channel incorrect. Parameter0:0x{0,x}, Parameter1:0x{1,x}, Parameter2:0x{2,x}</Message>
		</Event>
		<Event>
			<Id>24601</Id>
			<Message LcId="1033">SAFEOUT:Initial-Parameter: Number of Diagnosis inactive Channel incorrect. Parameter0:0x{0,x}, Parameter1:0x{1,x}, Parameter2:0x{2,x}</Message>
		</Event>
		<Event>
			<Id>24602</Id>
			<Message LcId="1033">SAFEOUT:Initial-Parameter: Number of Feedback active Channel incorrect. Parameter0:0x{0,x}, Parameter1:0x{1,x}, Parameter2:0x{2,x}</Message>
		</Event>
		<Event>
			<Id>24603</Id>
			<Message LcId="1033">SAFEOUT:Initial-Parameter: Number of Feedback Diagnosis active Channel incorrect. Parameter0:0x{0,x}, Parameter1:0x{1,x}, Parameter2:0x{2,x}</Message>
		</Event>
		<Event>
			<Id>24604</Id>
			<Message LcId="1033">SAFEOUT:Initial-Parameter: Number of Feedback inactive Channel incorrect. Parameter0:0x{0,x}, Parameter1:0x{1,x}, Parameter2:0x{2,x}</Message>
		</Event>
		<Event>
			<Id>24605</Id>
			<Message LcId="1033">SAFEOUT:Initial-Parameter: Number of Feedback Diagnosis inactive Channel incorrect. Parameter0:0x{0,x}, Parameter1:0x{1,x}, Parameter2:0x{2,x}</Message>
		</Event>
		<Event>
			<Id>24606</Id>
			<Message LcId="1033">SAFEOUT:Setup Hardware Fault: Module Switch. ReturnData:0x{0,x}, ReturnState:0x{1,x}</Message>
		</Event>
		<Event>
			<Id>24607</Id>
			<Message LcId="1033">SAFEOUT:Setup Hardware Fault: Diagnosis active Module. ReturnData:0x{0,x}, ReturnState:0x{1,x}</Message>
		</Event>
		<Event>
			<Id>24608</Id>
			<Message LcId="1033">SAFEOUT:Setup Hardware Fault: Diagnosis inactive Module. ReturnData:0x{0,x}, ReturnState:0x{1,x}</Message>
		</Event>
		<Event>
			<Id>24609</Id>
			<Message LcId="1033">SAFEOUT:Setup Hardware Fault: Feedback active Module. ReturnData:0x{0,x}, ReturnState:0x{1,x}</Message>
		</Event>
		<Event>
			<Id>24610</Id>
			<Message LcId="1033">SAFEOUT:Setup Hardware Fault: Feedback Diagnosis active Module. ReturnData:0x{0,x}, ReturnState:0x{1,x}</Message>
		</Event>
		<Event>
			<Id>24611</Id>
			<Message LcId="1033">SAFEOUT:Setup Hardware Fault: Feedback inactive Module. ReturnData:0x{0,x}, ReturnState:0x{1,x}</Message>
		</Event>
		<Event>
			<Id>24612</Id>
			<Message LcId="1033">SAFEOUT:Setup Hardware Fault: Feedback Diagnosis inactive Module. ReturnData:0x{0,x}, ReturnState:0x{1,x}</Message>
		</Event>
		<Event>
			<Id>24613</Id>
			<Message LcId="1033">SAFEOUT:Setup Hardware Fault: Channel Switch. ReturnData:0x{0,x}, ReturnState:0x{1,x}</Message>
		</Event>
		<Event>
			<Id>24614</Id>
			<Message LcId="1033">SAFEOUT:Setup Hardware Fault: Diagnosis active Channel. ReturnData:0x{0,x}, ReturnState:0x{1,x}</Message>
		</Event>
		<Event>
			<Id>24615</Id>
			<Message LcId="1033">SAFEOUT:Setup Hardware Fault: Diagnosis inactive Channel. ReturnData:0x{0,x}, ReturnState:0x{1,x}</Message>
		</Event>
		<Event>
			<Id>24616</Id>
			<Message LcId="1033">SAFEOUT:Setup Hardware Fault: Feedback active Channel. ReturnData:0x{0,x}, ReturnState:0x{1,x}</Message>
		</Event>
		<Event>
			<Id>24617</Id>
			<Message LcId="1033">SAFEOUT:Setup Hardware Fault: Feedback Diagnosis active Channel. ReturnData:0x{0,x}, ReturnState:0x{1,x}</Message>
		</Event>
		<Event>
			<Id>24618</Id>
			<Message LcId="1033">SAFEOUT:Setup Hardware Fault: Feedback inactive Channel. ReturnData:0x{0,x}, ReturnState:0x{1,x}</Message>
		</Event>
		<Event>
			<Id>24619</Id>
			<Message LcId="1033">SAFEOUT:Setup Hardware Fault: Feedback Diagnosis inactive Channel. ReturnData:0x{0,x}, ReturnState:0x{1,x}</Message>
		</Event>
		<Event>
			<Id>24624</Id>
			<Message LcId="1033">SAFEOUT:The Feedback of the active Module Switch is wrong. Module:0x{0,x}</Message>
		</Event>
		<Event>
			<Id>24625</Id>
			<Message LcId="1033">SAFEOUT:The Feedback of the inactive Module Switch is wrong. Module:0x{0,x}</Message>
		</Event>
		<Event>
			<Id>24626</Id>
			<Message LcId="1033">SAFEOUT:The Feedback of the active Channel Switch is wrong. Module:0x{0,x} / Channel:0x{1,x}</Message>
		</Event>
		<Event>
			<Id>24627</Id>
			<Message LcId="1033">SAFEOUT:The Feedback of the inactive Channel Switch is wrong. Module:0x{0,x} / Channel:0x{1,x}</Message>
		</Event>
		<Event>
			<Id>24640</Id>
			<Message LcId="1033">SAFEOUT:Diagnosis Test: Common Fault Module:0x{0,x} / DiagChannel:0x{1,x}</Message>
		</Event>
		<Event>
			<Id>24641</Id>
			<Message LcId="1033">SAFEOUT:Diagnosis Test: Unknown State local ModuleState:0x{0,x}</Message>
		</Event>
		<Event>
			<Id>24642</Id>
			<Message LcId="1033">SAFEOUT:Diagnosis Test: Unknown State other ModuleState:0x{0,x}</Message>
		</Event>
		<Event>
			<Id>24656</Id>
			<Message LcId="1033">SAFEOUT:Diagnosis Test: Feedback active Module Switch is wrong (Step1 - check current state). Module:0x{0,x}</Message>
		</Event>
		<Event>
			<Id>24657</Id>
			<Message LcId="1033">SAFEOUT:Diagnosis Test: Feedback inactive Module Switch is wrong (Step1 - check current state). Module:0x{0,x}</Message>
		</Event>
		<Event>
			<Id>24658</Id>
			<Message LcId="1033">SAFEOUT:Diagnosis Test: Feedback active Channel Switch is wrong (Step1 - check current state). Module:0x{0,x} / DiagChannel:0x{1,x}</Message>
		</Event>
		<Event>
			<Id>24659</Id>
			<Message LcId="1033">SAFEOUT:Diagnosis Test: Feedback inactive Channel Switch is wrong (Step1 - check current state). Module:0x{0,x} / DiagChannel:0x{1,x}</Message>
		</Event>
		<Event>
			<Id>24672</Id>
			<Message LcId="1033">SAFEOUT:Diagnosis Test: Feedback active Module Switch is wrong (Step2 - check test pulse). Module:0x{0,x}</Message>
		</Event>
		<Event>
			<Id>24673</Id>
			<Message LcId="1033">SAFEOUT:Diagnosis Test: Feedback inactive Module Switch is wrong (Step2 - check test pulse). Module:0x{0,x}</Message>
		</Event>
		<Event>
			<Id>24674</Id>
			<Message LcId="1033">SAFEOUT:Diagnosis Test: Feedback active Channel Switch is wrong (Step2 - check test pulse). Module:0x{0,x} / DiagChannel:0x{1,x}</Message>
		</Event>
		<Event>
			<Id>24675</Id>
			<Message LcId="1033">SAFEOUT:Diagnosis Test: Feedback inactive Channel Switch is wrong (Step2 - check test pulse). Module:0x{0,x} / DiagChannel:0x{1,x}</Message>
		</Event>
		<Event>
			<Id>24704</Id>
			<Message LcId="1033">SAFEOUT:Diagnosis Test:VendorData. ID: 0x{0,x} Module:0x{1,x}</Message>
		</Event>
		<Event>
			<Id>24705</Id>
			<Message LcId="1033">SAFEOUT:Diagnosis Test:VendorData. ID: 0x{0,x} Module:0x{1,x}</Message>
		</Event>
		<Event>
			<Id>24706</Id>
			<Message LcId="1033">SAFEOUT:Diagnosis Test:VendorData. ID: 0x{0,x} Module:0x{1,x}</Message>
		</Event>
		<Event>
			<Id>24707</Id>
			<Message LcId="1033">SAFEOUT:Diagnosis Test:VendorData. Channel: 0x{0,x} Module:0x{1,x}</Message>
		</Event>
		<Event>
			<Id>24708</Id>
			<Message LcId="1033">SAFEOUT:Diagnosis Test:VendorData. Channel: 0x{0,x} Module:0x{1,x}</Message>
		</Event>
		<Event>
			<Id>24709</Id>
			<Message LcId="1033">SAFEOUT:Diagnosis Test:VendorData. Channel: 0x{0,x} Module:0x{1,x}</Message>
		</Event>
		<Event>
			<Id>24710</Id>
			<Message LcId="1033">SAFEOUT:Diagnosis Test:VendorData. Channel: 0x{0,x} Module:0x{1,x}</Message>
		</Event>
		<Event>
			<Id>24720</Id>
			<Message LcId="1033">SAFEOUT:Module Switch FeedbackTest ViolationCounter incremented, Outputs active. Module:0x{0,x}, Info:0x{1,x}.</Message>
		</Event>
		<Event>
			<Id>24721</Id>
			<Message LcId="1033">SAFEOUT:Module Switch FeedbackTest ViolationCounter incremented, Outputs inactive. Module:0x{0,x}, Info:0x{1,x}.</Message>
		</Event>
		<Event>
			<Id>24722</Id>
			<Message LcId="1033">SAFEOUT:Channel Switch FeedbackTest ViolationCounter incremented, Outputs active. Module:0x{0,x}, Channel:0x{1,x}, Info:0x{2,x}.</Message>
		</Event>
		<Event>
			<Id>24723</Id>
			<Message LcId="1033">SAFEOUT:Channel Switch FeedbackTest ViolationCounter incremented, Outputs inactive. Module:0x{0,x}, Channel:0x{1,x}, Info:0x{2,x}.</Message>
		</Event>
		<Event>
			<Id>24724</Id>
			<Message LcId="1033">SAFEOUT:Module Switch DiagnosisTest ViolationCounter incremented, Outputs active (Step1 - check current state). Module:0x{0,x}, Info:0x{1,x}.</Message>
		</Event>
		<Event>
			<Id>24725</Id>
			<Message LcId="1033">SAFEOUT:Module Switch DiagnosisTest ViolationCounter incremented, Outputs inactive (Step1 - check current state). Module:0x{0,x}, Info:0x{1,x}.</Message>
		</Event>
		<Event>
			<Id>24726</Id>
			<Message LcId="1033">SAFEOUT:Channel Switch DiagnosisTest ViolationCounter incremented, Outputs active (Step1 - check current state). Module:0x{0,x}, Channel:0x{1,x}, Info:0x{2,x}.</Message>
		</Event>
		<Event>
			<Id>24727</Id>
			<Message LcId="1033">SAFEOUT:Channel Switch DiagnosisTest ViolationCounter incremented, Outputs inactive (Step1 - check current state). Module:0x{0,x}, Channel:0x{1,x}, Info:0x{2,x}.</Message>
		</Event>
		<Event>
			<Id>24728</Id>
			<Message LcId="1033">SAFEOUT:Module Switch DiagnosisTest ViolationCounter incremented, Outputs active (Step2 - check test pulse). Module:0x{0,x}, Info:0x{1,x}.</Message>
		</Event>
		<Event>
			<Id>24729</Id>
			<Message LcId="1033">SAFEOUT:Module Switch DiagnosisTest ViolationCounter incremented, Outputs inactive (Step2 - check test pulse). Module:0x{0,x}, Info:0x{1,x}.</Message>
		</Event>
		<Event>
			<Id>24730</Id>
			<Message LcId="1033">SAFEOUT:Channel Switch DiagnosisTest ViolationCounter incremented, Outputs active (Step2 - check test pulse). Module:0x{0,x}, Channel:0x{1,x}, Info:0x{2,x}.</Message>
		</Event>
		<Event>
			<Id>24731</Id>
			<Message LcId="1033">SAFEOUT:Channel Switch DiagnosisTest ViolationCounter incremented, Outputs inactive (Step2 - check test pulse). Module:0x{0,x}, Channel:0x{1,x}, Info:0x{2,x}.</Message>
		</Event>
		<Event>
			<Id>24736</Id>
			<Message LcId="1033">SAFEOUT:Sercom Fault 0. Cmd/State:0x{0,x}</Message>
		</Event>
		<Event>
			<Id>24737</Id>
			<Message LcId="1033">SAFEOUT:Sercom Fault 1. Cmd/State:0x{0,x}</Message>
		</Event>
		<Event>
			<Id>24752</Id>
			<Message LcId="1033">SAFEOUT:Unknown Sercom Command Request 1. Cmd/State:0x{0,x}</Message>
		</Event>
		<Event>
			<Id>24753</Id>
			<Message LcId="1033">SAFEOUT:Unknown Sercom Command Answer 1. Cmd/State:0x{0,x}</Message>
		</Event>
		<Event>
			<Id>24754</Id>
			<Message LcId="1033">SAFEOUT:Unknown Sercom Command Request 2. Cmd/State:0x{0,x}</Message>
		</Event>
		<Event>
			<Id>24755</Id>
			<Message LcId="1033">SAFEOUT:Unknown Sercom Command Answer 2. Cmd/State:0x{0,x}</Message>
		</Event>
		<Event>
			<Id>24768</Id>
			<Message LcId="1033">SAFEOUT:Module Switch too fast Switching OFF detected Fault (see technical data). Module:0x{0,x}</Message>
		</Event>
		<Event>
			<Id>24769</Id>
			<Message LcId="1033">SAFEOUT:Channel Switch too fast Switching OFF detected Fault (see technical data). Module:0x{0,x} / Channel:0x{1,x}</Message>
		</Event>
		<Event>
			<Id>24770</Id>
			<Message LcId="1033">SAFEOUT:Module Switch too fast Switching ON detected Fault (see technical data). Module:0x{0,x}</Message>
		</Event>
		<Event>
			<Id>24771</Id>
			<Message LcId="1033">SAFEOUT:Channel Switch too fast Switching ON detected Fault (see technical data). Module:0x{0,x} / Channel:0x{1,x}</Message>
		</Event>
		<Event>
			<Id>24772</Id>
			<Message LcId="1033">SAFEOUT:Module Error Acknowledge is not possible. Module:0x{0,x}</Message>
		</Event>
		<Event>
			<Id>24800</Id>
			<Message LcId="1033">SAFEOUT:HAL Read Fault. ReturnData:0x{0,x}</Message>
		</Event>
		<Event>
			<Id>24801</Id>
			<Message LcId="1033">SAFEOUT:Init Fault. Module:0x{0,x}</Message>
		</Event>
		<Event>
			<Id>32777</Id>
			<Message LcId="1033">SAFEIN:Initial-Parameter: MultiplierDiagTestPulse has to be greater zero. ModuleNr:0x{0,x}</Message>
		</Event>
		<Event>
			<Id>32784</Id>
			<Message LcId="1033">SAFEIN:Initial-Parameter: Number of Modules incorrect. ModuleNr:0x{0,x}, Parameter:0x{1,x}</Message>
		</Event>
		<Event>
			<Id>32785</Id>
			<Message LcId="1033">SAFEIN:Initial-Parameter: Number of Channels incorrect. Parameter0:0x{0,x}, Parameter1:0x{1,x}, Parameter2:0x{2,x}</Message>
		</Event>
		<Event>
			<Id>32792</Id>
			<Message LcId="1033">SAFEIN:Initial-Parameter: Number of Diagnosis active Channel incorrect. Parameter0:0x{0,x}, Parameter1:0x{1,x}, Parameter2:0x{2,x}</Message>
		</Event>
		<Event>
			<Id>32795</Id>
			<Message LcId="1033">SAFEIN:Initial-Parameter: Number of Feedback Diagnosis active Channel incorrect. Parameter0:0x{0,x}, Parameter1:0x{1,x}, Parameter2:0x{2,x}</Message>
		</Event>
		<Event>
			<Id>32805</Id>
			<Message LcId="1033">SAFEIN:Setup Hardware Fault: Channel Switch. ReturnData:0x{0,x}, ReturnState:0x{1,x}</Message>
		</Event>
		<Event>
			<Id>32806</Id>
			<Message LcId="1033">SAFEIN:Setup Hardware Fault: Diagnosis active Channel. ReturnData:0x{0,x}, ReturnState:0x{1,x}</Message>
		</Event>
		<Event>
			<Id>32809</Id>
			<Message LcId="1033">SAFEIN:Setup Hardware Fault: Feedback Diagnosis active Channel. ReturnData:0x{0,x}, ReturnState:0x{1,x}</Message>
		</Event>
		<Event>
			<Id>32832</Id>
			<Message LcId="1033">SAFEIN:Diagnosis Test: Common Fault Module:0x{0,x} / DiagChannel:0x{1,x}</Message>
		</Event>
		<Event>
			<Id>32833</Id>
			<Message LcId="1033">SAFEIN:Diagnosis Test: Unknown State local ModuleState:0x{0,x}</Message>
		</Event>
		<Event>
			<Id>32834</Id>
			<Message LcId="1033">SAFEIN:Diagnosis Test: Unknown State Other ModuleState:0x{0,x}</Message>
		</Event>
		<Event>
			<Id>32835</Id>
			<Message LcId="1033">SAFEIN Pulse Detection: Wrong pulse was detected at . Module:0x{0,x} / DiagChannel:0x{1,x}</Message>
		</Event>
		<Event>
			<Id>32836</Id>
			<Message LcId="1033">SAFEIN Pulse Detection: Detected pulse from Module:0x{0,x} / DiagChannel:0x{1,x}</Message>
		</Event>
		<Event>
			<Id>32850</Id>
			<Message LcId="1033">SAFEIN:Diagnosis Test: Feedback in Step1 active Channel is wrong. Module:0x{0,x} / DiagChannel:0x{1,x}</Message>
		</Event>
		<Event>
			<Id>32866</Id>
			<Message LcId="1033">SAFEIN:Diagnosis Test: Feedback in Step2 active Channel is wrong. Module:0x{0,x} / DiagChannel:0x{1,x}</Message>
		</Event>
		<Event>
			<Id>32896</Id>
			<Message LcId="1033">SAFEIN:Diagnosis Test:VendorData. ID: 0x{0,x} Module:0x{1,x}</Message>
		</Event>
		<Event>
			<Id>32897</Id>
			<Message LcId="1033">SAFEIN:Diagnosis Test:VendorData. ID: 0x{0,x} Module:0x{1,x}</Message>
		</Event>
		<Event>
			<Id>32900</Id>
			<Message LcId="1033">SAFEIN:Diagnosis Test:VendorData. Channel: 0x{0,x} Module:0x{1,x}</Message>
		</Event>
		<Event>
			<Id>32901</Id>
			<Message LcId="1033">SAFEIN:Diagnosis Test:VendorData. Channel: 0x{0,x} Module:0x{1,x}</Message>
		</Event>
		<Event>
			<Id>32902</Id>
			<Message LcId="1033">SAFEIN:Diagnosis Test:VendorData. Channel: 0x{0,x} Module:0x{1,x}</Message>
		</Event>
		<Event>
			<Id>32918</Id>
			<Message LcId="1033">SAFEIN:DiagnosisTest ViolationCounter incremented, Inputs active (Step1 - check current state). Module:0x{0,x}, Channel:0x{1,x}, Info:0x{2,x}.</Message>
		</Event>
		<Event>
			<Id>32922</Id>
			<Message LcId="1033">SAFEIN:DiagnosisTest ViolationCounter incremented, Inputs active (Step2 - check test pulse). Module:0x{0,x}, Channel:0x{1,x}, Info:0x{2,x}.</Message>
		</Event>
		<Event>
			<Id>32928</Id>
			<Message LcId="1033">SAFEIN:Sercom Fault 0. Cmd/State:0x{0,x}</Message>
		</Event>
		<Event>
			<Id>32929</Id>
			<Message LcId="1033">SAFEIN:Sercom Fault 1. Cmd/State:0x{0,x}</Message>
		</Event>
		<Event>
			<Id>32944</Id>
			<Message LcId="1033">SAFEIN:Unknown Sercom Command Request 1. Cmd/State:0x{0,x}</Message>
		</Event>
		<Event>
			<Id>32945</Id>
			<Message LcId="1033">SAFEIN:Unknown Sercom Command Answer 1. Cmd/State:0x{0,x}</Message>
		</Event>
		<Event>
			<Id>32946</Id>
			<Message LcId="1033">SAFEIN:Unknown Sercom Command Request 2. Cmd/State:0x{0,x}</Message>
		</Event>
		<Event>
			<Id>32947</Id>
			<Message LcId="1033">SAFEIN:Unknown Sercom Command Answer 2. Cmd/State:0x{0,x}</Message>
		</Event>
		<Event>
			<Id>32960</Id>
			<Message LcId="1033">SAFEIN:Error Acknowledge is not possible. Module:0x{0,x}</Message>
		</Event>
		<Event>
			<Id>32961</Id>
			<Message LcId="1033">SAFEIN:Diagnosis Test: Implausible Inputs detected. Module:0x{0,x}</Message>
		</Event>
		<Event>
			<Id>32962</Id>
			<Message LcId="1033">SAFEIN:Diagnosis Test: Implausible Inputs detected (INFO). Parameter1:0x{0,x} / Parameter2:0x{1,x}</Message>
		</Event>
		<Event>
			<Id>32992</Id>
			<Message LcId="1033">SAFEIN:Init HAL Fault.ReturnState:0x{0,x}</Message>
		</Event>
		<Event>
			<Id>32993</Id>
			<Message LcId="1033">SAFEIN:Init Fault. Module:0x{0,x}</Message>
		</Event>
		<Event>
			<Id>33008</Id>
			<Message LcId="1033">SAFEIN: Testpulse is parametrized but not enabled (Diag Testpulse for Inputs active). Module:0x{0,x} / Channel:0x{1,x}</Message>
		</Event>
		<Event>
			<Id>33009</Id>
			<Message LcId="1033">SAFEIN: Testpulse is parametrized but not enabled (Diag TestPulse active). Module:0x{0,x} / Channel:0x{1,x}</Message>
		</Event>
		<Event>
			<Id>33010</Id>
			<Message LcId="1033">SAFEIN: Testfilter-Time too long. Parameter1:0x{0,x} / Parameter2:0x{1,x}</Message>
		</Event>
		<Event>
			<Id>33011</Id>
			<Message LcId="1033">SAFEIN: Inputfilter-Time too short. Parameter1:0x{0,x} / Parameter2:0x{1,x}</Message>
		</Event>
		<Event>
			<Id>33012</Id>
			<Message LcId="1033">SAFEIN: Wrong parameters detected for Module:0x{0,x} / Channel:0x{1,x}. Please check parameters!</Message>
		</Event>
		<Property>
			<Name>DisplayTxtId</Name>
			<Value>true</Value>
		</Property>
	</Source>
</TcEventSources>